The output voltage of your inverter, and input voltage the vacuum is designed for, must match. Check your labels! (And of course, since an inverter outputs AC, your vacuum should also be AC). In practice, the voltage can vary 10 to 15%, so if the voltage labels are slightly different, you're probably ok. (At least in the US, mains voltage is expected to be between 110 and 125 VAC RMS) The vacuum should not (try) to use more power than the inverter is rated for. Equivalently, it should not (try) to draw more current than the inverter is rated for.
type of inverter
An inverter does not store energy.
USE INVERTER USE INVERTER USE INVERTER
what is the main function of transformer in inverter
No. If the load requires 168 W, then an 84 W inverter is not going to maintain the load.
An inverter that consists of a DC-motor driving a AC-Generator.
12 volt of an ordinary inverter battery
The only way an Inverter could overload a circuit would be on the supply side. The fusing/protection for the inverter is incorrect.
Microchipexpert is one of the best Inverter Repairing Institute in Delhi. We give Inverter training using latest and advance machine with 100% practical. In Inverter repairing course, we provide faulty Inverter for repairing to our students for live practical in our lab.
The voltage and frequency should be marked on the fan. This should match the voltage and frequency of the power coming out of the inverter. The inverter also has be capable of supplying anough power (in watts).
The Inverter is a sort of Backwards device.Let's say if you wire up a button to an Inverter and the Inverter is wired up to a Wiring door. When the Button is turned off, the door will open. When the button is turned on, the door will close.