train
The railway jobs that are available in California are Supervisor, Engineer, Track maintenance crew, operator, Driver, Electrical Engineer and Rail Track Welder.
Long Carriage, it means that the track and frame is longer so the ground pressure is reduced.
No, track is not a collective noun. The word track is a common, singular noun.
yes
Lift the faulty track of the ground by raising the digger with the dipper arm. if you look at the middle of the carriage that holds the track (between the drive sprocket & idle wheel) you should see a small steel plate. This is normally held in place with 2 bolts, remove it & you should then see a "Grease Nipple". If you screw this out you will then be able to push (may need knocked back with sledge hammer) the idle wheel back along the carriage, giving you enough slack to put the track back on. Screw the nipple back in and pump with grease till the track had reached the required tension.
I don't see why not. Lots of engineering jobs overlap, but to be sure I'd check with more knowledgeable people on the subject (i.e. track down an aeronautical engineer, ask him)
no, one track is short and the other is long (its common sense)
A recording track sheet is a form of document that a recording engineer uses to keep track of what instrument is recorded on what channel of a multi-track recording device.Example: Channel 1- Bass drum, Channel 2- Snare Drum, Channel 3- Hi-Hat Cymbal, etc.
If at all possible if an engineer saw an obstruction on the track he would stop the train. Trains take quite a distance to stop, so they often wind up hitting the obstruction.
An ancient two wheeled cart pulled by horses are called chariots. They were used as transportation that started in the biblical era.
Track ball Track pad Integrated Pointing Device
love me do