WrisTech monitor des not display any reding. Instead it shows ERROR on the blank screen.
What does error 3 mean on a wristech blood pressure monitor
I have a CASIO HPB-500 blood pressure monitor. Pressing MEASURE I read DEMO and not BP-M. So I can't be able to do my test. Is someone able to explain me my error or problem with the machine. Thank you in advance. My email is gabriele511@alice.it
The correct reading is an average of the three, since it reduces the error.
Codes from the Manual:E-1: Temperature is too hot or too cold for the system to work properly. Move your monitor and test strips to a location where the temperature is appropriate and monitor again with a new test strip. You may have to wait for your monitor to adjust to the new temperature. Refer to your test strip instructions for use for the appropriate operating range. If the error message appears again, contact Customer Care.E-2: Monitor error. Turn the monitor off, then repeat previous monitoring steps. If the error message appears again, contact Customer Care.E-3: There may be a problem with the test strip. Review the monitoring instructions. Monitor again with a new test strip. If the error message appears again, contact Customer Care.E-4: Blood glucose result may be too high to be read by the system. OR There may be a problem with the blood glucose or blood ß-Ketone test strip. Monitor again with a new test strip. If the error message appears again, contact your healthcare professional immediately.E-5: Blood applied to test strip too soon. Review the monitoring instructions. Monitor again with a new test strip. If the error message appears again, contact Customer CareE-6: Calibration/Test strip error. Repeat the calibration using the calibrator bar that came with the test strip you are using. Check the date setting on your monitor. Check the expiration date on the test strip foil packet. If the error message appears again, contact Customer Care.E-7: Test strip error. Test strip is damaged, used, or the monitor does not recognize it. Monitor again using a test strip designed for use with Precision Xtra. If the error message appears again, contact Customer Care.E-8: Monitor error. Remove test strip, turn monitor off, and try to monitor again. If the error message appears again, contact Customer Care.E-9: Monitor error. Remove test strip, turn monitor off, and try to monitor again. If the error message appears again, contact Customer Care.Customer Care: (800) 527-3339
error in blood pressure measurement
Error message on monitor
It really depends on the monitor. Most digital monitors are better than the doctor using a cuff and a stethescope. For someone who has irregular heartbeats, that isn't the case and it can throw off error messages.
Turbulence. Be it normal or abnormal, the "sound of blood" is always turbulence. This includes what you hear when you take a blood pressure ... which is a major source of error IF blood flow is abnormal (as in shock).
Improper positioning of the patient can effect blood pressure readings. The patient should be sitting upright with elbow slightly bent, resting the arm on a surface that is level with the heart. This will give you the most accurate reading.
Fuel pressure error.
you need to re-hook up the wires for the monitor.
Give us precisely the error phrase, it would be much easier to help you.