The HOLD light means you have an electrical problem with your transmission. See your mechanic ASAP.
The alarm warning light in your 2002 Mazda Protg is an indication that the alarm system is deactivated. Remove the alarm fuse, for 10 seconds. Put the fuse back into its original slot.
you needs a dpfe sensor
It means you have a malfunction in the cars engine. If it blinks stop ASAP!.. You need a scanner to pull the codes to get to what exactly is wrong
sounds like your accelerator rod has gone out. that is common in that style of mazda.
It means there is something wrong. I have not been able to get a reason yet but will post when I find out. If you restart your car it will go back to normal.
So does that mean my alternator is bad but I just bought two of them
P0455 code for mazda Protede... Evaporative Emission System Leak Detected (gross leak/ no flow)
Bring to a shop that has an ABS scanner to determine the problem
The AT dashboard light on the Mazda 6 means there is a problem with the transmission.
If you mean PO660 it is Intake Manifold Tuning Valve circuit Malfunction. Click the link.
It also means check your oil level, sounds to me like it is down a couple quarts.
On a Mazda tribute, the car with a key light indicator means that the engine is started.
The engine computer had detected something wrong somewhere in the engine management system. This could be an O2 sensor or any number of things. Take your car to a shop and have your car scanned for fault codes to see what the problem might be.
Trouble code P0171 means :System too lean (bank 1)
Have you checked the codes it is throwing? If your engine light is on, most likely there is a reason. Take the car to a local autozone. They can pull the codes for free and tell you what they mean. http://www.autozone.com/servlet/UiBroker?UseCase=S001&UserAction=viewSimpleDiagInfo&Parameters=info
It can mean several things if the hold light flashes on your Mazda Familia 1997 model. It can indicate a shortage in the wiring or a blown fuse.
Higher then expected Idle, at least 200 RPM. May be a vacuum leak, a dirty Idle Air Control valve.
Talk to your Mazda dealer but, it sounds like a problem with your automatic transmission and just like a check engine light it may be a number of problems.
The engine is overheating.
Trouble code P0170 means: Adaptive Fuel Trim Too Rich or Too Lean (Bank 1)
its for traction
that light is the low coolant warning light