it means it goes back to the factory settings
This means it is ready to print what you want it to.
it means that you need to give it a rest and make sure that you go to the bathroom befor it takes a long time
Grand theft Auto....
ur printers cartridge one or all are empty and it WILL NOT print
The minimum printer specifications for Auto CAD are a buffer RAM of 256MB and a print resolution of up to 2400 x 1200 dpi.
If a monitor says auto processing, it means there are driver problems. To deal with this, simply remove the power cable from the monitor. Wait for a minute and plug it back in and turn on the monitor.
The OS is telling you that it has lost the ability to write data to the printer. This is normally caused by some sort of corruption in the system. I would try deleting the print job and trying again. If that does not work delete the printer and enable it again. If that does not work reboot the computer and restart the printer. The last step is to reinstall the printer drivers.
HelloYou have an oil leak is what is means.
It depends on the printer you have. At some printers you have to print a page that says you the ink levels and at others you can see it through the printer's driver.
go Jo at auto stores
Throw it out
Auto duplex is when you can set your printer to print on both sides of a paper without you having to manually change the paper to the other side. So, if I want to print a 2 sided document, first, I print the odd pages, then I have to turn those pages around & put the blank side through the printer to print the even pages. If your printer has auto duplexing, it would feed those pages through by itself.