Want this question answered?
tuned circuit consists of resistance and capacitor so this one RC circuit formula to be used f = 1/ 2 pi RC
Linear (Straight) circuit: An electronic circuit where the info sinusoidal flood of recurrence f give a stead state yield. This circuit take after ohms law and the estimation of electronic parts doesn't change with the level of voltage of current in the circuit. Non-Linear (Non direct) circuit: The circuit in which the parameters change as for current and voltage. The parameter esteem like resistance, capacitance, inductance, waveform, recurrence and so on, is not consistent. This circuit doesn't take after ohms law and the v-i attributes are not a straight line.
Any capacitor that is initially uncharged, when presented with a step change in voltage, will have an instantaneous resistance of zero ohms. As a result, the instantaneous current with a circuit involving 4500 ohms and 500 volts will be about 0.111 amperes. It does not matter what the capacitance is.The stated voltage in the question is unclear, so 500 volts was assumed for the answer.
It depends on C as well as F. The equation is ...XC = -1/(2 pi F C)... where the -1 simply is convention for leading power factor. So, if you had a capacitance of 100 microfarads, you would get 100 ohms at 1592 hertz.
The net resistance can be found out using the algebraic sums f series and parallel connections. When there is no current flowing in the circuit the net resistance is infinite.
E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F. When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display. When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display. Normal thermistor resistance values: 60 degrees F. - 15.3K ohms. 70 degrees F. - 11.9K ohms. 80 degrees F. - 9.2K ohms.
First of all, let's get the terms correct. It's "millihenrys", not "milliHenry's", and it's "ohms", not "Ohms".Presumably, you are trying to find out the inductive reactance (XL) of a circuit having an inductance (L) of 9.55 mH? The equation for this is:XL = 2 pi f LAs you can see, you need to know the frequency (f)in order to do this.
tuned circuit consists of resistance and capacitor so this one RC circuit formula to be used f = 1/ 2 pi RC
Voltage=V in Volts Current=I in Amps Resistance=R in Ohms Inductance=F in Henry Capacitance=C in Farads
Voltage=V in Volts Current=I in Amps Resistance=R in Ohms Inductance=F in Henry Capacitance=C in Farads
Linear (Straight) circuit: An electronic circuit where the info sinusoidal flood of recurrence f give a stead state yield. This circuit take after ohms law and the estimation of electronic parts doesn't change with the level of voltage of current in the circuit. Non-Linear (Non direct) circuit: The circuit in which the parameters change as for current and voltage. The parameter esteem like resistance, capacitance, inductance, waveform, recurrence and so on, is not consistent. This circuit doesn't take after ohms law and the v-i attributes are not a straight line.
Inductive reactance, XL, in ohms, is given by:XL = 2 pi f Lwhere:f = frequency (Hz)L = inductance (H)
XL= 2 * Pi * f * L = 6.28 * 60 * .5 = 188 ohms
Trouble code P1155 means: A/F Sensor Heater Circuit Malfunction
The inductive reactance of a 15 Henry inductor at 60 Hz is about 5.7 KOhms. (2 pi f l)
Trouble code P0622 means:Generator field "F" control circuit malfunction
Any capacitor that is initially uncharged, when presented with a step change in voltage, will have an instantaneous resistance of zero ohms. As a result, the instantaneous current with a circuit involving 4500 ohms and 500 volts will be about 0.111 amperes. It does not matter what the capacitance is.The stated voltage in the question is unclear, so 500 volts was assumed for the answer.