0
The four octets make up a complete address. The first part refers to a network, the remainder an individual computer in a host; however, the exact size of this "first part" may vary.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How many octets in ip address?
IPv4 addresses have 4 octets, each octet separated by a period. For example, at this time, one of Yahoo's servers has an ip address of 67.195.160.76.
How many octets does an ip address have?
There are 2 main IP protocols. In IP version 4, each IP address has 4 octets. In IP version 6, each IP address has 16 octets.If somebody says "IP address" without further qualifications, he probably means IP version 4, since that is the current standard. IP version 6 is the planned future standard.There are 2 main IP protocols. In IP version 4, each IP address has 4 octets. In IP version 6, each IP address has 16 octets.If somebody says "IP address" without further qualifications, he probably means IP version 4, since that is the current standard. IP version 6 is the planned future standard.There are 2 main IP protocols. In IP version 4, each IP address has 4 octets. In IP version 6, each IP address has 16 octets.If somebody says "IP address" without further qualifications, he probably means IP version 4, since that is the current standard. IP version 6 is the planned future standard.There are 2 main IP protocols. In IP version 4, each IP address has 4 octets. In IP version 6, each IP address has 16 octets.If somebody says "IP address" without further qualifications, he probably means IP version 4, since that is the current standard. IP version 6 is the planned future standard.
How many octets IPv4 address?
255
Describe the structure an IP address?
An IP address consists of 4 octets (or bytes), of 8 bits each. It is written as pointed decimal, each byte separated from the others by a point, for example: 10.0.5.255.
How many octets are in IPV4 address?
4
What do you mean by ip address?
An "Internet Protocol Address" uniquely identifies a node on the Internet. Some IP address ranges are reserved for LAN use and do not appear on the full Internet WAN, allowing local nodes to actually have the same IP address but not conflict (this increases the number of allowable nodes without having to expand the size of an IP address). The original IP address was defined to be 4 bytes (octets) long, however the Internet eventually outgrew this and an alternate expanded IP address defined to be 6 bytes (octets) was defined to support the new nodes.
Which octet represents the network portion of a class c ip address?
The last 3 octets represent the host portion in a class A address.
How many bits are in the Ipv4 standard?
In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.
What is size of ip address version-4?
IPv4 is 32 bit. 4 octets of 8 bits each.
How many IP addresses in one ip octet?
A complete IP address has 4 octets. MPGMichael We are talking IPv4 because IPv6 uses quintets. There are 4 octets in an IPv4 address. Each octet is separated by a dot (.) Each place has a binary value assigned to it as follows. 128s, 64s, 32s, 16s, 8s, 4, 2s, and 1s place The place values repeat in each octet The place values are read from right to left in binary numbers Within each octet there are 2^8 or 2 to the 8thpower possible addresses. So the math answer is 256. However if you write it out you will see that 128+64+32+16+8+4+2+1 = 255 and 256 is actually carried to the next octet. So there are 255 possible addresses in each octet For example a class C address would look like this 192.168.1.2 or binary 11000000.10101000.00000001.00000010
How do you read and interpret the IP address?
priya- Tell me how to set Ip address for a network with 4 routers and 4 nodes...
How does the IP address indicate the network?
The first octet determines what class of network you are located on. From that, you can determine how many of the octets represent the network address, and which part represents the client or host portion. IP addresses in version 4 (iPv4) are divided into two segments: the network id and the host id. Knowing the range of network class addresses will help: Class A is 0 - 126 and uses only the first octet for the network portion Class B is 128 - 191 and uses the first two octets for the network id Class C is 192 - 223 and uses the first three octets for the network id An example would be: 192.168.1.5 is a class C address, so we use the first three octets for the network id. This gives a network id of 192.168.1.0 and a host id of 5 in that network.
