It holds everything together.
A rocket body tube is the center of a rocket; also the piece that holds the rocket together.
The body tube of a rocket is there for friction. As the rocket comes back down the body tube along with the fins are there to slow it down. Also the longer the body tube the faster your rocket will go. The body tube gives it a narrow edge.
In a model rocket that uses engines, there is an engine mount. The engine mount is located inside the body tube in the bottom where the engine goes. It usually consists of a small tube, two rings that connect it to the body tube, and a metal bar to hold the engine in the tube. Its job is to house the engine and hold it in place for a flight. glad to help, Uujjee
It is the main part of the rocket that everything else is built off of. The central piece.
A block ring holds the engine firmly in the rocket tube. If not for this, the engine would go up the tube and the rocket would go on fire.
Nose cone, fins, body tube, recovery system, motor (s) , launch lugs, recovery wadding.
A cardboard tube is most common
THe coupler is where the parachute is located and also where it will eject out of the rocket while the rocket is in the air. Written By: Amir Rasuli
You wrap tape or a cardboard ring around the engine mount until it fits tightly in the fuselage tube.
to hold the hole of the rocket
The outer shell of a rocket is called the rocket's body or fuselage. It is designed to protect the rocket's internal components and payload from the harsh environment of space.
turns you into a rocket