Its between the crankshaft & the clutch.
will 4.6 windsor engine with 6 bolt flywheel interchange with 8 bolt flywheel
30lbs
depends on the engine size the 4.6 flywheel to crank is 62lbs and pressure plate to flywheel is 18lbs
The eighth digit in the VIN is the engine code. The eighth digit for the 4.6 will be either 6 or W. 6 = Windsor. W = Romeo.The Windsor engine has 13 bolt valve covers and a 8 bolt crank (flywheel).The Romeo engine has 11 valve cover bolts, and a 6 bolt crank (flywheel).
There is a big bolt that is inside of the bottom pulley on the front of the engine, It is the bolt that holds the balancer on . Get a socket that fits that bolt and then turn the engine with that and that will rotate the fly-wheel.
bolt 15 mm 65 lbs bolt 17 mm 75 lbs bolt 19 mm 85 lbs
Vitara g16a auto. manual box bolts up but flywheel bolt pattern is different Samurai g13b box bolts up but flywheel bolt pattern is different
61 - 69 ft-lb
yes you can all you need to do is switch the automatic flywheel and putt on a standard flywheel and make sure the clutch from the transmission will bolt up to the flywheel.
loosen one bolt retaining the distributor, aim your timing gun at the flywheel and rotate the distributor until the line on the flywheel lines up with the correct mark on the engine block.
On the back of the engine, mounted between the engine and transmission, inside the bell housing. You cannot see the flywheel. The starter is connected to the flywheel when you start the engine.On the back of the engine, mounted between the engine and transmission, inside the bell housing. You cannot see the flywheel. The starter is connected to the flywheel when you start the engine.
you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points,