Bulbs convert an electrical energy to produce light
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
I you wired a light bulb in to the same circuit you have the possibility of over loading the circuit but other than that it would just be brighter.
The simplist answers is that electricity needs to complete a circuit fully. It stops flowing because there is no complete circuit. The switch is a device for opening and closing the circuit. When the switch is in the off position the circuit is said to be open and electricity cannot flow.
The job of the bulb in a circuit is to convert electrical energy to light. It's called the load in the circuit.
A light bulb can be part of a circuit.
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
It completes the circuit!!
it would be ok in a circuit which didn't need a light bulb.
The bulb converts energy from the power source into light and heat. It is the load in the circuit.
A bulb does not light up if there is no voltage available across the bulb, or if the bulb is burned out.
The circuit will have the flow of electricity interrupted.
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
a closed circuit
the circuit which has the maximum power output
When one wire or terminal is not connected to a light bulb, it is not possible for electricity to complete the circuit. When a circuit is not completed, the bulb will not light. An off switch, for example, breaks the circuit.