A bulb does not light up if there is no voltage available across the bulb, or if the bulb is burned out.
A closed switch completes the electrical circuit, allowing current to flow through the light bulb and generate light. If the switch is not closed, there is an open circuit, meaning the current cannot flow and the light bulb does not turn on.
To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.
For a circuit to light a bulb, there must be a closed loop for the flow of electricity. This loop typically consists of a power source (e.g. battery), wires, a switch, and the bulb. When the switch is closed, the circuit is complete and electricity can flow through the wires to the bulb, causing it to light up.
In a simple circuit with a battery and a light bulb, the battery provides electrical energy that flows through the wires to the light bulb. The electrical energy causes the filament in the light bulb to heat up and emit light. This process continues as long as the circuit remains closed and the battery has power.
If a light bulb is touched by a conductor to complete the circuit, it will turn on if the circuit is closed and working properly. The conductor helps to create a path for the electricity to flow from the power source to the light bulb, allowing it to illuminate.
A closed switch completes the electrical circuit, allowing current to flow through the light bulb and generate light. If the switch is not closed, there is an open circuit, meaning the current cannot flow and the light bulb does not turn on.
a closed circuit
It depend on where the switch is located in the circuit.
It is a closed circuit if there is a load in the circuit (light bulb etc), otherwise it is a short circuit (+ to - on a car battery with a screwdriver)
To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.
It will not work because it has to be closed so the electricity can go to the bulb.
For a circuit to light a bulb, there must be a closed loop for the flow of electricity. This loop typically consists of a power source (e.g. battery), wires, a switch, and the bulb. When the switch is closed, the circuit is complete and electricity can flow through the wires to the bulb, causing it to light up.
There must be a current through the bulb in order for it to glow.
They are open and closed circuit
In a simple circuit with a battery and a light bulb, the battery provides electrical energy that flows through the wires to the light bulb. The electrical energy causes the filament in the light bulb to heat up and emit light. This process continues as long as the circuit remains closed and the battery has power.
If a light bulb is touched by a conductor to complete the circuit, it will turn on if the circuit is closed and working properly. The conductor helps to create a path for the electricity to flow from the power source to the light bulb, allowing it to illuminate.
The circuit needs to be closed for the light bulb to light up because it allows current to flow uninterrupted from the power source through the light bulb, which then converts electrical energy into light and heat. If the circuit is open, the flow of current is interrupted, and the light bulb will not receive the necessary electrical energy to produce light.