answersLogoWhite

0

If a light bulb is touched by a conductor to complete the circuit, it will turn on if the circuit is closed and working properly. The conductor helps to create a path for the electricity to flow from the power source to the light bulb, allowing it to illuminate.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

Would a paper clip complete a circuit to make a light glow?

No, a paper clip is not a good conductor of electricity and may not be able to complete a circuit to make a light glow. It is recommended to use materials that are good conductors like metal wire for completing an electrical circuit.


Explain how you can test whether something is an insulator or conductor?

You can test if something is an insulator or conductor by connecting a circuit with a power source and a light bulb. If the material allows the light bulb to turn on, it is a conductor. If the light bulb does not turn on, it is an insulator.


How could you use your open circuit to test if a material is a conductor or a insulator?

To test if a material is a conductor or insulator, you can set up a simple circuit with a battery, wires, and a light bulb. When the circuit is open (broken), no current flows and the light bulb does not light up, indicating an insulating material. When the circuit is closed (connected), current flows and the light bulb lights up, indicating a conducting material.


A complete what is needed to make a bulb light up?

To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.


How can you make a circuit to find out if an object is an insulator or a conductor?

You can create a simple circuit with a battery, a light bulb, and wires. Connect the wires to the battery and light bulb, then touch the ends of the wires to the object in question. If the light bulb lights up, the object is a conductor as it allows the flow of electricity. If the light bulb does not light up, the object is an insulator as it does not allow the flow of electricity.

Related Questions

What does the conductor in a circuit do?

A conductor carries the voltage potential from the source to the load, i.e. the wires from a circuit breaker to a light.


Would a paper clip complete a circuit to make a light glow?

No, a paper clip is not a good conductor of electricity and may not be able to complete a circuit to make a light glow. It is recommended to use materials that are good conductors like metal wire for completing an electrical circuit.


What is the function of the switch in circuit?

A switch simply opens a circuit, stopping the flow of electricity. For example: a simple circuit would be two wires from a battery, one of which goes to a switch, and the other goes to a light bulb. A third wire goes from the other side of the switch to the other conductor of the light bulb. With the switch closed the circuit is complete and the light goes on. Open the switch and the circuit is broken and the light goes off.


What part of a circuit is the light bulb?

It has components that are arranged end to end in order to produce light.


Explain how you can test whether something is an insulator or conductor?

You can test if something is an insulator or conductor by connecting a circuit with a power source and a light bulb. If the material allows the light bulb to turn on, it is a conductor. If the light bulb does not turn on, it is an insulator.


how to use circuit in sentence?

to complete the circuit you have to add 1 light bulb.


How could you use your open circuit to test if a material is a conductor or a insulator?

To test if a material is a conductor or insulator, you can set up a simple circuit with a battery, wires, and a light bulb. When the circuit is open (broken), no current flows and the light bulb does not light up, indicating an insulating material. When the circuit is closed (connected), current flows and the light bulb lights up, indicating a conducting material.


A complete what is needed to make a bulb light up?

To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.


Will a circuit light with aluminium foil?

Aluminum foil will conduct electricity, so it can be used to complete a circuit and light a lamp..


How a light bulb works in a complete circuit?

A Light bulb lights in a complete circuit because then the electricity from the battery can travel round the wire that has no breaks. BUT the switch has to be close. Z


Why does not tester light up when it is touched to neutral of 3 pin socket?

Because the neutral is simply the return path in a complete circuit. It doesn't carry any power - that's only found in the live wire.


What happens when the circuit is complete and the switches are closed?

*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.