0
Your seat belt is not buckled. Buckle your seatbelt!
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How can you tell if your timing belt is bad?
how can you tell if a timing belt is bad
How can you tell if your 1999 grand marquis jumped time?
You use a timing light to check the marks on the timing chain/belt.
Why does the check engine light come on after a timing belt change on a Toyota sienna 02?
There are many reasons why a check engine light could come on following a timing belt change. When the check engine light comes on there is a code stored in the computer to tell you why the light came on. Most auto parts stores will read the code for free.
How do you tell if my belt is a real gucci belt?
by asking my dick
How do you disable the seat belt chime in your 2007 grand marquis?
IF it is going off when you are in park, then you have a problem that needs to be fixed. Usually all you have to do is open the door and close it.=============The 'beltminder' is the most frustrating safety feature ever. It goes off in park with the car running. Don't tell me it isn't supposed to. It does. I'm tired of snyde people like the guy who previously answered, "I know, but I'm not going to tell you because I'm going to save your life blah blah blah." I was able to put a seatbelt on before the Beltminder, and I can continue to today. I am actually LESS likely to wear my seatbelt when I hear that god-forsaken beeping. I do not want How_do_you_disable_the_seat_belt_warning_alarm_in_a_2007_mercury_grand_marquisto tell me what to do, and I don't need the seatbelt on when I'm eating Burger King and listening to the radio IN PARK. So, to all of you, "Just wear the seatbelt" people, please shut up, k? You suck. Thanks!I have successfully disabled the "Beltminder" system on my Mercury Grand Marquis as it is very annoying to have it ringing a bell every 10 seconds (see below).==============================================Instructions to disable "Beltminder" in a Mercury Grand MarquisPermanent deactivation: There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so,make sure that:· The parking How_do_you_disable_the_seat_belt_warning_alarm_in_a_2007_mercury_grand_marquisis set.· The truck/car is in Park (automatic), Neutral (manual).· The ignition is OFF.· All doors are closed.· The driver's safety belt is un-buckled.· The parking and headlights are OFF.Then follow these 9 steps:1. Turn the ignition switch to ON, but DO NOT START.2. Wait for the How_do_you_disable_the_seat_belt_warning_alarm_in_a_2007_mercury_grand_marquiswarning light to go OFF(1-2 minutes).Steps 3-5 MUST be completed within 60 seconds!3. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.4. Turn on the headlights, turn off the headlights.5. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.After step 5, the Safety Belt Warning Light will be turned on for 3 seconds.6. Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.Read more: How_do_you_disable_the_seat_belt_warning_alarm_in_a_2007_mercury_grand_marquis
How do you turn off the seatbelt sensor in your 2005 Taurus?
You can Deactivate the Belt Minder two ways. First, you can deactivate it temporarily for your current "run cycle", that is after you have started your car and it's still running. Second, you completely deactivate the Belt Minder so that it never reminds you again, or at least until your reactivate it...The first method, temporary deactivation, or one time disable: After you have started your vehicle, buckle and then un-buckle your safety belt. Be sure to buckle back up.... This will disable the Belt Minder only for that ignition cycle.The second method, permanent deactivation: There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so, make sure that: The parking brake is set. The truck/car is in Park (automatic), Neutral (manual). The ignition is OFF. All doors are closed. The driver's safety belt is un-buckled. The parking and headlights are OFF. Then follow these 9 steps:Turn the ignition switch to ON, but DO NOT START. Wait for the safety belt warning light to go OFF(1-2 minutes). Steps 3-5 MUST be completed within 60 seconds!Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. Turn on the headlights, turn off the headlights. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. After step 5, the Safety Belt Warning Light will be turned on for 3 seconds.Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt. This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds. Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again. After confirmation, the deactivation/activation of the Belt Minder procedure is complete.Obviously, buckling the seatbelt should silence the reminder. If you see/hear the reminder and all belts used by the reminder ARE buckled, the vehicle should be taken in for service ASAP.If you do not want to use your seatbelt for whatever reason, and wish to disable or silence the reminder system altogether, this can be done in a matter of minutes by a serviceperson at a dealership using a custom option setting device connected to the vehicle's internal computer. As this is a safety system, some dealerships may not be willing to do this unless you sign a liability waiver.However, if you do not wish to have the vehicle serviced professionally for whatever reason or would like to disable or bypass the seat belt reminder system for certain seats only, the following options may be of help:A piece of sheet metal of the same dimensions and shape as the actual seat belt 'plug' can be inserted into the seat belt 'socket' to silence the reminder. Obviously, the more the piece of metal resembles the actual 'plug', the more likely it is to work.Also, as seat belt buckle design has not changed much lately, a junkyard is one source of seat belt 'plugs' that can be cut from their straps and inserted in the seat belt 'socket' to silence the reminder chime. It's likely that several model years of a car (and even different makes/models) may all have similar seat belt 'plugs'.Lastly, there are wires running down the 'socket' end of the seatbelt which tell the car's computer if the seat belt is buckled or not. These wires may be cut, stripped and connected together (or separated, depending on which stops the reminder) permanently.It should be mentioned that disabling or bypassing this safety system in any way is discouraged by vehicle manufacturers, insurance companies, safety specialists and many other private and public organizations and individuals. However, there are conditions for which seatbelt use is extremely uncomfortable or presents more harm than benefit, such as in the case of certain abdominal/thoracic medical conditions, morbid obesity, etc.answer:It's very simple. There is a small box-like switch plugged into your fuse box. Just pull it out. That will stop the warning bell/buzzer. The trick is to find out which "box" (switch) it is. Just pull them out one by one. You will find out. You won't hurt the car, don't worry. Look for tiny lettering on the fuse box itself, it may well say STBT, meaing, "seatbelt warning indicator". Something like that. You can try autozone.com, maybe they have a diagram of the fuse box for you. Maybe.
How do you disable the seat belt warning alarm in a 2007 mercury grand marquis?
If your state has State Inspection Laws, doing so will cause your vehicle to fail the inspection. You should always wear your seatbelt. I know how to do it, but since I've picked up so many that have gone through their windshields because they failed to buckle up, I will not provide the answer. The 'beltminder' is the most frustrating safety feature ever. It goes off in park with the car running. Don't tell me it isn't supposed to. It does. I'm tired of snyde people like the guy who previously answered, "I know, but I'm not going to tell you because I'm going to save your life blah blah blah." I was able to put a seatbelt on before the Beltminder, and I can continue to today. I am actually LESS likely to wear my seatbelt when I hear that god-forsaken beeping. I do not want my car to tell me what to do, and I don't need the seatbelt on when I'm eating Burger King and listening to the radio IN PARK. So, to all of you, "Just wear the seatbelt" people, please shut up, k? You suck. Thanks! I have successfully disabled the "Beltminder" system on my Mercury Grand Marquis as it is very annoying to have it ringing a bell every 10 seconds (see below). ============================================== Instructions to disable "Beltminder" in a Mercury Grand Marquis Permanent deactivation: There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so, make sure that: · The parking brake is set. · The truck/car is in Park (automatic), Neutral (manual). · The ignition is OFF. · All doors are closed. · The driver's safety belt is un-buckled. · The parking and headlights are OFF. Then follow these 9 steps: 1. Turn the ignition switch to ON, but DO NOT START. 2. Wait for the safety belt warning light to go OFF(1-2 minutes). Steps 3-5 MUST be completed within 60 seconds! 3. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. 4. Turn on the headlights, turn off the headlights. 5. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled. After step 5, the Safety Belt Warning Light will be turned on for 3 seconds. 6. Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt. This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
What types of javascript alert boxes are there?
many, tell me which one you need and i will give you it,
Can you tow a motocycle trailer on the belt parkway?
Can you tell a boat trailer on the belt parkway
How can you tell when your dog is alert?
When your dog stand up with his ears up looking dead on at someone or something , that is a very deadly alert something is just not right in the house or wherever.
Are there any good quality medical alert bracelets that are functional and also decorative so that most people can't tell what it really is for?
There are medical alert bracelets which look okay.
2000 Hyundai Elantra air bag light stays on?
For a Hyundai Elantra the light staying on means you have a fault code in the airbag computer. This could be a problem with the seat belt buckle, seat belts, airbags, clock spring or computer itself. The vehicle needs to be scanned to see what error code is present. An approved scanner must be used or it will not tell you what the error is and you will be wasting your time and money. If there is a fault your airbag system will generally not work depending on the severity of the problem. For your safety and the safety of others, this should be seen to ASAP. By the way - You cant just turn it off!!!
