a plastic that has aids :)
Paul E. Cope invented Thermo plastic glue also known as "Hot Glue" it is used in Hot Glue guns.
Thermostat
thermo 1 is the hardest.
ThermoplastIc materials (such as polyethylene, nylon, etc ) are melt-processable, meaning that they can be heated to a melt (liquid) phase, forced into a mold, and then cooled to form a pre-determined shape. Typical processes include injection molding, compression molding, and blow molding. Thermoplastic materials can, many times, be potentially ground up and re-processed many times as there is no chemical reaction that occurs. Thermoset materials (such as epoxy, and some polyesters), on the other hand, undergo a chemical reaction and cross-linking of the polymer chains and can not be can't be ground up and re-processed.
Bad thermo,replace. The thermo senses that the pilot is lit and opens gas valve,also could be bad or blocked gas valve.
Thermo
thermoplastic
thermosetting is atype of plastic which can't be recycled
Thermal setting plastic is plastic that can only be heated once and then set into the shape needed
Plastic forks and knives (Disposable utensils)
Thermo Plastic was created on 1999-10-13.
They are used for making plastic's but the plastics they make aren't biograble
Thermoplastics can be shaped easily by being cooled and heated time and time again. They suffer little degration by the heating and cooling. They are solid at room temp. Thermoset on the other hand cannot be repeatedly heated and cooled. if you try to re heat they become chared and do not re soften.
it is a thermo setting plastic if it is what you asked
The two types of plastics that start with thermo are thermoset plastic and thermoplastics plastic.hope that helps you! x
Basically there are two types of thermoplastic, thermoset and thermoform. Thermoset becomes hard when heated an example would be Bakelite. A thermoform plastic gets soft when heated and can be reformed. An example would be abs such as used in plastic pipe. Gil
no