answersLogoWhite

0

Shouldn't have any effect, either positive or negative. The brake pedal may sink a little once the engine has started running, but that would be normal as vacuum pressure increased.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is foot breaking in a race car?

Applying the brakes with your foot!


Which brakes are used more when stopping a car?

Foot brakes are used to stop a car. In an emergency however both the foot and hand brakes can be used to stop a car.


Can Gout effect just one foot?

Yes it is most likely to start in the big toe.


How do you do the brakes?

place pressure on the pedal with your foot (preferably)


How do you stop a car with one foot?

hit the brakes....


When you put a foot on the brakes there is air what is that from?

from the brake booster


What should you do if you have a blow out while driving?

dont slam brakes,foot off gas,steer straight! (point blank answer nothing more or less)


When do you start fouettes?

You start fouettes by prepping.Prepping- a position in dance were right foot in front bent while left foot in back is bent as well. arms are in a beachball position.


How do you adjust trailer brakes on a 53 foot?

To adjust the trailer brakes on a 53-foot trailer, start by ensuring the trailer is safely supported and the wheels are chocked. Check the brake adjustment by spinning the wheels; they should rotate freely but have a slight drag when the brakes are applied. Use the brake adjustment mechanism, typically a slack adjuster or manual adjuster, to tighten or loosen the brakes until the desired drag is achieved. Finally, ensure the brakes are functioning properly by conducting a test drive and checking for even braking.


When the foot brakes is pressed what light must come on?

red


Why does your car shake when your foot is off the brakes?

vacuum leak 65 power brakes run off a vacuum, when you apply your brakes you stop the air leak. 65;


When your foot is on the brakes why does it shake you?

Your rotors need to be turned. They have become warped.