What effect does rifleing in the barrel of a gun have?

The Brunswick rifle was made with a raised belt on the bullet- the raised belt fitted into two grooves in the barrel. See the link below for more information.

Oxidation of the steel of a gun barrel.

On a real gun it deflects the mussel gas and helps to keep the gun barrel from flipping up. It also helps in recoil reduction. In an airgun it is more for show and has little effect on the gun.

On a real gun it deflects the mussel gas and helps to keep the gun barrel from flipping up. It also helps in recoil reduction. In an airgun it is more for show and has little effect on the gun.

The gun barrel is the metal part that the bullet comes out of.

Flower in the Gun Barrel was created in 2008.

the barrel is the part that the bullet travels through once the gun is fired. it is on the inside of the gun.

It is the part of a gun which contains the bullet or shot, and, upon being fired, guides the bullet or shot out of the gun.

The barrel is usually above the centerline of the gun. When fired, recoil pushes straight back from the line of the barrel, but that is offset above the centerline, and causes the gun to pivot.

A barrel is part of a gun

Sorry, but we need more information on the term "round barrel gun".

Grooves cut into the inside of a gun barrel for the purpose of spinning the bullet when fired.

Originally by drawing a cutting tool through the bore that cut one groove at a time. Now it may be done with a rifling button (made of VERY hard metal) that is pulled through the barrel, cutting all the grooves in one pass. Barrels can also be hammer forged- a rod with all of the grooves on it is placed in a heated barrel, and the barrel hammered to shrink it onto the rod- which…

Yes, it is called "spiking", although it is likely to cause the barrel to explode if the gun (or artillery piece) is fired. YOU CANNOT PREVENT A GUN GOING OFF, BY INSERTING YOUR FINGER INTO THE BARREL

You will have to replace the barrel

Barrel of a Gun - Guster song - was created in 1998.

Looking Down the Barrel of a Gun was created on 1989-07-25.

That the barrel (not the gun, the BARREL) was made in June 1944. Posibbly an M1 Garand, or an 1903 Springfield?

double barrel shotgun

The barrel moves when the weapon is fired.

The caliber of a firearm refers to the bore diameter of the barrel,and what caliber is marked near the chamber of the gun,or on the barrel.

Not a generally used term- it would be the portion of a gun that holds the barrel. Not present on all guns.

Longer barrels to increase accuracy and fps slightly, but getting tighter bore barrels has a much greater effect on both. Also, the effect of barrel length works in a way that the longer a barrel is, the less effect a barrel extension has. For example, replacing a pistol barrel with one that is 3 inches longer has a much larger effect on the pistols accuracy than adding 3 inches to a sniper rifle barrel has…

Looking for someone with history of a single barrel shot gun with wells Fargo & co on barrel and four notches also on gun like to know if its from the stage coach era as the shot gun is called coach

how to tell the age of a 12 gauge single barrel shot gun made by American Gun Company?

Barrel contains the force of expanding gasses, as it pushes bullet out of the barrel.

Yes. The temperature most affects CO2 tanks by expanding or contracting the gas, but also affect the barrel and paint. If your barrel is cold, then it will shrink, which will give you a different shooting pattern when it is at room temperature or hot.

Reference is to politics- that the person that controls military force (the barrel of the gun) controls all.

Try on line auctions, gun shops, gun shows, want ads.

Depends on the type of gun and who made it.

Clean the barrel.

Depends on the size of the barrel.

Barrel length is measured from the bolt face to the end of the barrel.

Pretty much, yes. You should be able to shoot regular ammunition through it although without rifleing, the bullet will just rattle down the bore and won't be stabilized. Accuracy would be terrible.

His gun is a double barrel shotgun. There are a few kinds, but his is a generic long barrel type shotgun.

Right underneath the main barrel is another much smaller barrel. Pull on this barrel and it releases opening the gun so that the caps can be placed.

You should be able to locate a barrel at numrich gun parts corp.If not try looking at gun broker. both sites are located on the web.

The Crosman 120 is a rifle not a gun. It is a break barrel. Cock the barrel all the way down and load a pellet into the rear of the barrel. Pull the barrel back up and it' is ready to fire.

the barrel is the long part that the bulliet comes out

It is the opening at the front of the gun where the bullet leaves the barrel.

Gun can refer to a long gun or a hand gun. A rifle is very particular. It has to have grooved barrel which spin the bullet when it is going down the barrel. This spin action on the bullet makes it more accurate.

The cast of Flower in the Gun Barrel - 2008 includes: Martin Sheen as Narrator

BB Guns by Design are not accurate. They use a smooth bore barrel. It's just like a tube. BB's are round so they tumble as they fly through the air. So by nature they are not very accurate beyond a few yards. Pellet guns use a rifled barrel just like a real gun, this makes the pellet spin as they travel through the air and this makes them accurate. This rifleing adds to the cost…

The one I have has a 20 inch barrel.

A tool that cuts a crown at the muzzle end of the barrel

The barrel of a firearm is the tube through which a bullet travels when a gun is fired.

No, do not put any lube in the barrel, but on the threads.

11 - 48 slug barrel

Any autococker threaded barrel.

A magnet in the seat of the barrel