Solder can be configured with several different types of metals. For instance, silver solder would contain a portion of silver along with another metal. Common electrical solder usually contains a mixture of tin and lead in the ratio of 60/40. That too can vary if the manufacturer wants to make a solder that requires a higher tempreature to melt it.
No, curling irons can only reach 200F to 300F, to melt solder you need to reach at least 600F (which would catch hair on fire!).
Rear: CHOCK FRONT TIRES. Raise with floorjack on differential, Jackstands on axle or pinch welds on frame rails. Front: E-BRAKE ENGAGED. Raise with floorjack on center of front axle (Not Differential), Jackstands on Pinch Welds on Frame Rails
It is possible that you might need to solder wires in your guitar jack. You could find the wiring diagram online.
Yes they can. Solder is always a lower karat gold than the object being soldered. This ensures that the solder will always melt at a lower temperature than the gold itself. If the rings are carefully heated until the melting point of the solder has been reached, the rings should be able to separate. WARNING...whoever is separating the rings must be very aware of what they are doing because the application of too much heat can cause the gold itself to warp or completely melt, thus permanently damaging or destroying the rings themselves. A reputable jeweler should have no problem separating the rings for you. take care.
No, hydrochloric acid contains hyrogen and chlorine, so therefore it is not an element.
Bronze, solder.
Scandium
It is a mixture
An electric heating element heats the tip just above the melting temperature of the solder being used.
usually a mixture of tin and lead metals are used
Soldering iron
Well, it's a metal, and a fairly soft one at that. Feels pretty much like solder.
with solder
Yes, usually no problem. If you know how to solder, then solder away.
In some solder it is. But even if it is in the solder you should still use flux.
Yes: flux core solder is. No: acid core solder is not.
Solder is a metallic alloy