Yes they can. Solder is always a lower karat gold than the object being soldered. This ensures that the solder will always melt at a lower temperature than the gold itself. If the rings are carefully heated until the melting point of the solder has been reached, the rings should be able to separate. WARNING...whoever is separating the rings must be very aware of what they are doing because the application of too much heat can cause the gold itself to warp or completely melt, thus permanently damaging or destroying the rings themselves. A reputable jeweler should have no problem separating the rings for you. take care.
The rings of an archery target are concentric circles.
the rings for the 5 angels of chritmas
Brothers & Sisters were not usually separated during WW2. Only if it was specified by the parents to separate them they were separated. If you watch the 1st Narnia. The 4 children are all together.
No, Taylor Swift's parents are not Separated, they are still Married.
That seems to be quite a common problem on the 1998 models , from what I have read it is caused by bad soldered connections inside the radio.
Tungsten rings can not be soldered at all due to its high melting point and hardness.
The time and cost involved in separating two rings that are soldered together really depends on the type of metal used in the piece - platinum, gold, silver, etc. Typically, the rings can be separated easily but a majority of the time is spent polishing and cleaning up the metal after separation so that both rings look as flawless as possible. In terms of dollars, a good estimate of time is to allocate about $100/hour for high-level labor and about 1-3 hours of total labor.
The decision to wear your wedding rings when separated and in the process of divorcing is up to each individual woman. Some women prefer to leave their wedding rings on because they do not want to be bothered too soon by other men, but many women take the rings off and leave them off as they are no longer in a partnership with their spouse.
Outdoor spigots are always threaded and not soldered on.
Saturn has thousands of small rings, but the exact number is unknown, according to California Institute of Technology. Scientists group the rings together into seven categories, which are separated by gaps called divisions
Saturn has thousands of small rings, but the exact number is unknown, according to California Institute of Technology. Scientists group the rings together into seven categories, which are separated by gaps called divisions
CPUs are not normally soldered to motherboards. They plug into a socket that's soldered to the board.
Soldered joints will have a higher resistance if the joint is not a clean solder joint. Badly soldered joints are classed as a cold solder joint. <<>> ...for what? Application matters here.
NO
Copper pipe is soldered. Steel pipe is welded. Plastic pipe (pvc) is glued. There is even a type of pipe that is smoked...
Depends on what you are doing. soldered is for copper water lines. Threaded can be for water, gas, or anything else.
What is the value of a small footed Wilcox 7075 SILVER SOLDERED WORTH