This is the typical light switch in your home that controls a single light from a single location. Sometimes you might see it described as SPST or single pole single throw.
Unless the switch has a light to indicate the switch is turned on, there is no neutral connection to a single pole switch.
Answer for USA, Canada and countries running a 60 Hz supply service.The difference between a double pole switch and a single pole switch is the use of the switch in the installation or equipment. A double pole switch is used when the voltage from two circuits has to be broken. An example of this is a 240 volt supply. A single pole switch is used where there is only a single supply voltage that has to be broken.
Single pole toggle switch.
single pole, single throw.
A single pole switch interrupts only one wire, which must be the live wire. A double pole switch interrupts both the live and the neutral, so it contains two separate switches operated by the same lever. Current practice is to use single-pole switches, to avoid a fault condition which could leave equipment live while switched off.
In electrical terminology it is known as a single pole double throw switch.
Unless the switch has a light to indicate the switch is turned on, there is no neutral connection to a single pole switch.
single pole switch with sthetic diagram are hard to find these days
Answer for USA, Canada and countries running a 60 Hz supply service.The difference between a double pole switch and a single pole switch is the use of the switch in the installation or equipment. A double pole switch is used when the voltage from two circuits has to be broken. An example of this is a 240 volt supply. A single pole switch is used where there is only a single supply voltage that has to be broken.
Single pole toggle switch.
In electronics, an SPDT is a type of switch. It stands for "Single Pole, Double Throw." In America, it's known as a three-way switch.
single pole, single throw.
Yes, If you only hook up two wire it will work as a single pole
A single pole switch is the ordinary switch that is used to turn the lights off and on in your home. A double throw switch is also known as a 3-way switch in North America. A double throw switch has a single pole connected to a common screw or terminal, often black. There are 2 additional screws or terminals, often brass colored. In one switch position this pole is connected to one of these screws or terminals and in the other position it connects to the other screw or terminal. If you think of a baseball diamond as an example for this switch, in one position the base line from home to first is hot. In the other position the base line from home to third is hot.
A single pole switch interrupts only one wire, which must be the live wire. A double pole switch interrupts both the live and the neutral, so it contains two separate switches operated by the same lever. Current practice is to use single-pole switches, to avoid a fault condition which could leave equipment live while switched off.
yes
If you need to switch 2 poles then that's what you'll need. Just don't get your wires crossed