0
What else can I help you with?
What is a typical input configuration for accounting information systems?
PCs) or workstations running applications, scanning devices for standardized data entry, and electronic communication devices for electronic data interchange (EDI) and electronic commerce (e-commerce). In addition, many financial systems come "Web
What are typical products from the optical instruments industry?
Companies in this industry manufacture a plethora of devices, including weapon-firing control mechanisms, optical laser-sighting systems, binoculars, borescopes,
What devices besides a typical computer use ROM?
none
How many devices can be added to a typical IDE controller?
4
What is the maximum number of devices that can be connected to a typical SCSI 1 controller card?
7
How is hydraulic system better than pneumatic system with a brief disicussion?
Difficult question to answer without context. Key thing to understand is a pneumatic system uses a compressor, whereas a hydraulic system uses a pump. Hydraulic fluid is essentially incompressible, whereas compressed air will fill any volume. Ask yourself: What is my pneumatic/hydraulic system supposed to do? How fast should it react and what horsepower is available to drive my compressor/pump? What force do I need at my actuator/motor or whatever the system is expected to power? Generally, I think pneumatic systems can react more quickly but power density is lower, so if the load is very high a hydraulic system might be better. A typical shop pneumatic system might only operate at 50psi, whereas a hydraulic system can operate at 3000psi. Finally, it's also worth thinking about system safety: if a pneumatic component fails, there will be an explosive decompression, but if a hydraulic component fails, it will leak but will not explode because hydraulic fluid does not store energy, it only transmits it.
What is the modulation?
Phase modultion is one of the three ways of modulating or altering a signal so that it is able to carry information. The other two are amplitude and frequency modulation. Phase modulation is used in high speed modems.
What are typical reasons given for not following a systems development process?
ask rubel mam..
How much work output does a pneumatic roller produce per hour?
The work output of a pneumatic roller can vary widely based on its size, model, and the specific application it is used for. Generally, a typical pneumatic roller can produce between 1,500 to 3,000 square meters of compaction per hour, depending on factors like soil type and moisture content. For precise figures, it's best to consult the manufacturer's specifications or operational guidelines for the specific roller in question.
How much moisture is removed from a mobile ac systems during a typical evacuation?
.7 ounce
What is the typical range of a Bluetooth link?
The typical range of a Bluetooth link is generally around 10 meters (33 feet) for most consumer devices, which corresponds to Class 2 Bluetooth devices. However, some devices can achieve longer ranges, with Class 1 devices reaching up to 100 meters (328 feet) in open spaces. The actual range can be affected by factors such as obstacles, interference from other wireless signals, and the specific Bluetooth version in use.
What are the typical installations of Mobile IP?
Typical installations of Mobile IP are simply devices that have the ability to log onto the Internet, such as smartphones, tablets, e-readers, or any other technology driven device.
