Want this question answered?
A is a clip-on device that mounts on top of the processor fingers or fins at its base pull the heat away from the processor?
They create a large surface area so that they can convect heat away from further away from the transistors meaning they are more effective at keeping it cool
yes, usually mounted directly to the top of the processor is a heat-sink(piece of aluminum with fins, lots of what could be called fingers) its purpose is to dissipate(remove) heatA COOLER is a clip-on device that mounts on top of the processor; fingers or fins at its base pull the heat away from the processor.~tekno
yes, usually mounted directly to the top of the processor is a heat-sink(piece of aluminum with fins, lots of what could be called fingers) its purpose is to dissipate(remove) heatA COOLER is a clip-on device that mounts on top of the processor; fingers or fins at its base pull the heat away from the processor.~tekno
Fins on a motorcycle engines help to direct heat away from the engine. The concept is that creating more surface area on an engine can help to cool it down.
The fins act to distribute heat from the system or absorb heat into the system from the surrounding air depending on the location and purpose of the coils carrying the coolant. In a heat pump system, the fins function depends on which way the heat is being transferred. For an air conditioner, the indoor fins bring heat to the coolant from the air and expel heat at the outdoor fins into the air
An air cooled system uses cooling fins, in which air is either blown past these fins by a flywheel or a cooling fan, this air that is blown into these fins carries residual heat away from the cylinder jug.
Conduction - example: the aluminum fins surrounding electronic devices that produce heat, like diodes or high output coils. These fins conduct heat away from the interior space.
Processors handle electric switches (transistors) which in their process create heat. Heat sinks are attached along with fans to draw away the heat created
If the room temperature is cooler then you are. it is because metal is a good conductor of heat. When you put your hand on the metal it immediately starts to draw heat away from your hand this gives you the impression that it is cooling you, which it is. If you do the same with a piece of wood it is not able to draw the heat away from you be cause it is a reasonable insulator.
Geometry Five dierent n geometries are available. Geometric dimensions to be specied for each fin type are Straight Fins Annular Fins Longitudinal Fins Rectangular Fins Conical Fins Trapezoidal Fins Parabolic Fins Cylindrical Fins/Pins/Spines Truncated Conical Spine Triangular Fins
heat sinks