Water is good as it will cut off oxygen and cool the heat source.
Powder and foam will smother to cut off oxygen.
Carbon Dioxide (CO2) will cut off oxygen but blast of gas may spread ther fire by blowing light material such as paper causing it to set fire to other things.
Don't use water on oil, or a chip pan fire.
A carbon dioxide extinguisher is recommended for an electrical fire. A dry powder extinguisher will work also but will damage equipment.
It is important because fire equipment that has not been rated for electrical fire use may conduct electricity and electro-fry the user, whereas equipment such
A Class C fire extinguisher.
Yes
An electrical fire is a class 'C' fire. In addition, Class 'A' is combustibles that leave an ash. (Paper, etc.) Class 'B' is flammable liquids. Class 'C' is electrical. Class 'D' is a metal fire.
Contact your local electrical inspector to be sure but I would say the answer is no.
Power hopefully is removed so the fire cannot get bigger.
ABC, BC or C. It is often best to disconnect the electrical power and use an extinguisher appropriate for whatever type of fuel happens to be burning (A or B). Do NOT use a water-type A fire extinguisher on an energized electrical fire.
NO!!!!! Use a Dry Chemical extinguisher
NO!!!!! Use a Dry Chemical extinguisher
Baking Soda & Class-C or ABC Fire ExtinguisherIf a fire extinguisher is not available and the fire is small, dousing it with enough baking soda can put it out. If you have one, use a class-C or multi-purpose ABC fire extinguisher to put out the flames. You can not use any other kind of fire extinguisher on an electrical fire (the extinguisher should be clearly marked, but if it's not and you're not sure what kind it is, don't use it)NEVER-EVER-EVER-use water on an electrical fire as it could cause electrocution-use a class-A fire extinguisher on an electrical fire.
A Class C fire extinguisher.
Hi There Around any electrical fires you must always avoid any liquid base Fire Extinguishers. The most effective Fire Extinguisher to use in that case of a microwave or any electrical appliance use a Carbon dioxide Fire Extinguisher.
Fire extinguisher symbols
Anything with a class "C" rating
A class C fire is an electrical fire. A class C extinguisher is approved for electrical fires.
you should use dry powder extinguisher
You would not want to use a pressure water extinguisher on any electrical fire due to the possibility of electricity being conducted through the water and injuring someone. A CO2, dry chemical or "clean agent" (e.g., "Halogenated") extinguisher would be a better choice for an electrical fire, knowing that dry chemical powder will make quite a mess.
A soda water extinguisher can be used on a fire of paper. Or use a carbon dioxide extinguisher if you don't want water damage, or if there is anything electrical that can cause a shock. Use foam on oils and flammable liquids.