look for an unhooked wire on the seatbelt itself or under the seat.
head gasket leak or thermostate needs to be replaced
Its the Primary o2 Sensor (pre-cat), needs to be replaced
Axle seal is bad and needs to be replaced
Your master cylinder seals are bad, and the unit needs either to be rebuilt or replaced. Replaced is better.
It is not very often that an ECM needs to be replaced. Generally they can be reprogrammed. Be sure of what and why you are doing what you are about to do. Guessing is very costly.
This could be the breaks needing replaced, could be a wheel bearing that needs replaced.
The parking mechanism isn't working and the magnet probably needs replaced. Take it to a garage as it has to be soldered in.
The multi-function switch is broken and needs to be replaced; see your local auto wrecker. Thanks Malcolm
when it no longer works. If it ain't broke don't fix it.
the problem is in your high beam switch. there is a short in it and it needs to be replaced
the front diff is not engaging its not the transfer case which is manual the solenoid needs replaced
the only thing i could find is check for water in the lens