What gap size is needed for a 95 suzuki Katana 600?

Answer 1

well- how @ an entire spec sheet if that helps???

Suzuki GSX600F specifications

Dimensions and mass

Overall length: 2,135mm (84,1 inches)

Overall width: 745mm (29,3 inches)

Overall height: 1,195mm (47,0 inches)

Wheelbase: 1,470mm (57,9 inches)

Ground clearance: 120mm (4,7 inches)

Seat height: 785mm (30,9 inches)

Dry weight 1988 to 1997: 200kg (441 lbs)

Dry weight 1998 on: 208 kg (458 lbs)

Engine

Engine type: Four stroke inline-four DOHC, air/oil-cooled with SACS, TSCC. 16 valves.

Piston displacement: 599 cc (36.6 cu.in.)

Bore x stroke: 62,6 mm x 48,7 mm

Compression ratio: 11,3:1

Carburetor 1988-1997: Mikuni BST32 x 4

Carbuteror 1998 on: Mikuni BSR32SS x 4

Starter system: Electric starter motor

Lubrication System: Wet sump

Clutch: Wet multi-plate type

Transmission: 6-Speed Constant Mesh

Gearshift pattern: 1-down, 5-up

Drive System: Chain, 118 links

Primary reduction ratio: 1.744

Final reduction ratio: 3.133

Chassis

Frame: double-craddle steel pipe

Front suspension: Conventional telescopic, coil spring, oil damped. 41 mm inner tube, fully adjustable rebound damping (1998 on: 4-step rebound damping)

Rear suspension: Swingarm, progressive linkage, 4-step rebound dampind, 7-step spring preload

Rake: 25,3 degrees

Trail: 99,5mm (3,9 inches)

Front brake: 2-piston calipers, dual disc, diameter 290 mm (11.4 in.)

Rear brake: 2-piston caliper, single disc, diameter 240 mm (9.5 in.)

Front wheel: 3.50 x17 inches, cast alumium-alloy

Rear wheel: 4.50 x17 inches, cast alumium-alloy

Front tyre: 120/70-ZR17

Rear tyre: 150/70-ZR17

Electrical

Ignition type: Transistorized

Ignition timing: 13° B.T.D.C. below 1500 rpm

Battery: 12V 39.6 kC (10Ah)/10HR

Generator: Three phase A.C. generator

Headlight: 12V 60/55W

Capacities

Fuel Tank (including reserve): 20 ltr (5.3/4.4 US/Imp gal)

Reserve: 5,0 ltr (5.3/4.4 US/Imp qt.)

Oil capacity: 4,7 liter

1988 GSX600FJ specs (click to enlarge):

Can anyone tell me why many of the numbers on this brochure are different?

GSX600F performance figures

Model

YearMax Speed (Prone) MPHMax Speed (Upright) MPHStanding Start 1/4 Mile

SEC@MPHPower

BHP@RPMAverage MPG

(guide)GSX600FJ1988130125.612.36@110.475.0@10,700N/AGSX600FL1990131.5126.512.60@107.569.0@9,50048GSX600FM1991135.5129.512.60@108.071.0@10,50044.5GSX600FP1993130.6126.612.20@109.072.0@10,50052.3

GSX600F service iInformation

Engine

Spark Plugs Standard (1988-1995) NGK DR8ES Hot type (1988-1995) NGK DR8ES-L Standard (1996 on) NGK CR9EK Hot type (1996 on) NGK CR8EK Gap 0,6 - 0,7 mm (0.024 - 0.028 inch) Engine idle speed 1988 and 1989 UK 1100 +/-100 rpm all others 1300 +/-100 rpm Valve clearance (cold engine) Screw-type valve adjusters 0,10 - 0,15 mm (0.004 - 0.006 inch) Shim-type valve adjusters Intake 0,10 - 0,20 mm (0.004 - 0.008 inch) Exhaust 0,15- 0,25 mm (0.006 - 0.010 inch) Cylinder Compression Pressure Standard 9,78 - 14,67 bars (142 - 213 psi) Minimum 7,85 bars (114 psi) Maximum variation 1,93 bars (28 psi) Cylinder numbering (left to right) 1-2-3-4

Recommended lubricants and fluids

Engine/transmission oil Type API grade SE or SF (minimum) Viscosity SAE 10W-40 Capacity With filter change 3,8 liters (4.0 US qt, 6.7 Imp pt) Oil change only 3,6 liters (3.8 US qt, 6.3 Imp pt) Engine overhaul 5,0 liters (5.3 US qt, 8.8 Imp pt) Brake fluid DOT 4 Fork oil Type SAE 10 - fork oil Amount 1988 460 cc (15.5 US fl oz, 16.2 Imp fl oz) Amount 1989 on 478 cc (16.1 US fl oz, 16.8 Imp fl oz) Oil level 1988 134 mm (5.28 inches) Oil level 1989 on 100 mm (3.93 inches) Drive chain 20W-50 engine oil (not chain lube) Cables and lever pivots Chain/cable lubricant or 10W-30 motor oil Sidestand/centerstand pivots Medium-weight lithium-based multigrease Brake pedal/shift lever pivots Chain/cable lubricant or 10W-30 motor oil Throttle grip Multi-purpose grease or dry film lubricant

Miscellaneous

Brake pad minimum thickness To limit line Brake pedal height 45 mm (1.8 inch) below top of footpeg Freeplay adjustments Throttle cable 0,5-1.0 mm (0.020-0.040 inch) Clutch cable 1988-1993 models 4 mm (0.16 inch) 1994 on 10 to 15 mm (0.4 to 0.6 inch) Drive chain Slack Standard 20-25 mm (0.8-1.0 inch) Service limit 45 mm (1.77 inch) 21-pin length 319,4 mm (12.6 inch) Battery electrolyte specific gravity 1,28 at 20°C (68°F) Minimum tire tread depth (2) Front 1,6 mm (0.060 inch) Rear 2,0 mm (0.080 inch) Tire pressure (cold) Front 2.27 bars (33 psi) Rear 2.48 bars (36 psi)

Torque specifications

Oil drain plug 20-25 Nm (18-25 ft-lbs) Spark plugs New plugs 1/2 turn after gasket touches engine Used plugs 1/4 turn after gasket touches engine

Model identification

Year and model code Frame numbers (starting frame number) 1988 GSX600FJ GN72A-100001 to 103968 1988 GSX600FJ GN72A-103979 to 104098 1989 GSX600FK GN72A-103969 to 103978 1989 GSX600FK GN72A-104099 1990 GSX600FL GN72A-106385 1991 GSX600FM GN72A-110633 1992 GSX600FN GN72A-115034 1993 GSX600FP GN72A-118194 1994 GSX600FR GN72A-121465 1995 GSX600FS GN72A-12371