0
What else can I help you with?
What does GA for tubing stand for?
the answer is gauge its a measurement of thickness in wire the 4 gauge (ga) wire ran from my car battery to power my audio amp. the smaller the number the bigger the wire usually from 24 gauge to 1/0 gauge which is about a inch thick
Which is thinner 24 gauge floral wire or 30 gauge floral wire?
Bigger guage number = smaller diameter wire. 30 guage is thinner
Does a 26 gauge wire have a lower resistive value than a 24 gauge wire?
If the wires are of identical materials, the 26 guage wire has more (higher) resistance.
What gauge wire is best for beads?
It depends on the size of the hole your beeds have. Usually prefer I prefer to work with 22-24 gauge soft wire.
Amp rating for 10 gauge stranded wire?
A #10 copper wire with an insulation factor of 90 degree C is rated at 30 amps. Code states that conductors can only be continuously loaded to 80%. 30 x .8 = 24 amps
What gauge wire can I use to convert 3 AA batteries?
AA batteries are probably used for a current of less than 1 amp so thin wire is fine, 0.5 mm-sqd or #24 wire would be ok.
What wire gauge used for headphones?
The wire gauge in thin headphone cables is quite small. I have read of people rewiring their headphones using 12 Gauge wire. There are commercial cables that use 11 gauge. The thicker the wire the less the resistance up to a point. Many headphones use 22 or 24 gauge and it seems to work OK.
What is gauge 8 means in copper electrical wire?
In cooper electrical wire, gauge 8 means the wire size assigned by the American Wire Gauge (AWG) system. That is why you always will hear about AWG WIRE, it's not the type of wire is the gauge that we are talking about. A gauge 8 wire will be used for connections requiring from 40-45 amps to a maximum of 73 amps. (24 for power transmission). Diameter of an 8 AWG wire is 0.12849 inches. 8 AWG is solid, not stranded.
What gauge wire are 4 24 gauge wires equal to?
Look up a wire table on google. The table tells you the cross-section area area of the 24 g wire. Multiply that by 4 then find the gauge that gives the new cross-section. A 24 AWG wire has a cross-section of 0.205 sq.mm. Four of those have a c/s area of 0.82 sq. mm. so the nearest equivalent wire is 21 AWG at 0.81 sq. mm.
Will 26 gauge wire work for a rabbit snare?
i would have to take a guess at this one and say yes aslong as its rather tough to snap. if i remember right 26 gauge wire is rather thin. I use 20 gauge wire 0.8mm and finding it a little to thick for anything smaller than a fox but 24 gauge is the lowest i would probably go. ive been taught though that the thinner the wire the better as long as it can take the strain. The U.S and British army both carry 24 gauge wire in their survival kits for multiple purposes, snaring being one of them.
How are wires measured?
Wiring is measured in AWG (American Wire Gauge) in North America.Sometimes it's designated with the number sign in front, such as14 gauge or #14 wire.The smaller gauge numbers, mean larger diameter wire. So #10 wire is thicker (and can carry more current) than #18.From The Home Depot Wiring 1-2-3 book, here are some typical gauges used in homes:For copper wiring: 10 gauge wire is rated for 30 amps, 12 gauge rated for 20 amps & 14 gauge wire rated for 15 amps.A wire going to a small appliance many times is 18 gauge. Telephone wire is smaller (I think 24 gauge).
What is the resistance value of 1 meter copper wire?
The resistance value of a 1 meter copper wire depends on its gauge (thickness) and temperature. For example, a 1 meter wire of 24-gauge copper has a resistance of about 25.67 ohms at room temperature. It is important to consider these factors when calculating the resistance of copper wire.
