0
What else can I help you with?
What is the name of the mechanism that produces the greatest amount of torque?
An angular force would produce a large torque like angular momentum of a spinning wheel.
Which vehicle produces the greatest torque output?
Ford F-450
What is the name of the mechanism that produces the amount of torque?
An angular force would produce a large torque like angular momentum of a spinning wheel.
What engine produces the most torque?
Caterpillar C15--2050 lb/ft of torque.
What is the difference between torque wrench and socket wrench?
The socket wrench is one among the system of wrenches that departs the wrench handle from the wrench that engages the fastener. Whereas, the torque wrench are the torque indicating socket wrench handle. When it is used properly, that could help you calculate the torque amount while fastening using the wrench. It also limits the amount of torque which is applied on material.
What is torque spec for 5-FE engine?
5-Sfe produces 135hp 145 ft/lbs of torque
Which series you joint has the greatest torque capacity?
1480
How much horsepower is in a 2001 Oldsmobile alero?
The 2.4 Liter I4 cylinder produces 150 h.p. and 167 ft/lb torque. The 3.4 Liter V6 produces 170 h.p. and 200 ft/lb torque.
Is hydraulic system used to increase torque in a shaft?
If the hydraulic system used Hydrvmvtvr torque is too high.
What is a force that produces or tends to produce rotation or torsion?
Torque is the force that produces or tends to produce rotation or torsion in an object. It is a measure of the twisting or turning force applied to an object. Torque is calculated as the product of the force and the distance from the point of rotation.
What is a force that produces or tends to produce ratation or torsion?
A torque is a force that produces or tends to produce rotation or torsion. It is a twisting force that causes an object to rotate around an axis. Torque is measured in units of force multiplied by distance, such as newton-meters.
What is the mean by engine torque?
Torque is the amount of 'twist' that the engine produces in the shaft. Torque is measured as a force applied over a distance, so 1 pound force applied over a lever of 10 feet gives 10 lb ft, exactly the same torque as ten pounds applied over 1 foot. Suppose the piston produces a downward force of 100 pounds, and the throw of the crankshaft is 6", the torque is 100 x 0.5 = 50 lb ft. Obviously it varies over the cycle so the torque is usually quoted as the average taken over a few revolutions. Power is torque times rpm, and a gearbox will reduce the rpm but multiply the torque, so that the output torque times rpm is (nearly) equal to the input torque times rpm. At 5250 rpm the horse power in HP is equal to the torque in lb ft, so the general formula is that HP = torque (lb ft) x RPM/5250. In SI units, power (watts) = torque (Newton-metres) times angular speed (radians/sec).
