Most are self adhesive
ANS 2 -Mapei Ultrrabond 300 is a good one.
No, it wouldn't work as Gorilla Glue swells. It would be better to use vinyl tile glue or spray contact cement
Depends on the surface you are sticking it to. I would start with a tile mastic glue.
Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl
Yes you can if you first rough up the ceramic by sanding it. Use a vinyl mastic like Mapei Unibond.
The best vinyl fence glue to use for repairing a broken vinyl fence panel is a PVC adhesive specifically designed for vinyl materials.
There is special vinyl glue for that. Available in Walmart and possibly other stores.
There are many practical and creative ways to use leftover vinyl floor tile. One can use leftover vinyl floor tile as pieces of art for a wall, as well as for furniture decorations and additions.
Yes, vinyl tile is waterproof and suitable for use in wet areas such as bathrooms and kitchens.
You might want to check the manufacturer's labels which often state whether you can use a product on a vinyl floor. You can use SC Johnson Wax Tile and Vinyl Floor Cleaner and Pledge Tile and Vinyl Floor Cleaner.
To install vinyl flooring over tile, you will need to thoroughly clean and smooth the tile surface, apply a self-leveling compound if needed, and then use a vinyl flooring adhesive to secure the vinyl tiles or planks in place. It is important to follow the manufacturer's instructions and ensure that the tile surface is suitable for vinyl installation.
Only if the vinyl was previously installed over concrete, and has a positive bond. Scar the finish of the vinyl with a hand sander (course paper), and use a high strength thinset for the installation.
The most effective method for removing floor tile glue is to apply a floor tile glue remover according to the product instructions, allow it to penetrate the glue, and then use a scraper or putty knife to gently lift and remove the softened glue from the surface.