If the motor was lightly loaded it may continue to run, however in most applications the loss of the phase would cause the motor to stop. Properly wired and it should trip the motor overload device and prevent damage to the motor windings.
This is how an induction motor normally works, hence the name. The supply voltage is connected to the stator winding(s) and a current is induced in the rotor. A synchronous motor, on the other hand, will have current supplied to the rotor through slip rings and brushes. The rotor current is generally supplied as DC though, or else rectified in the rotor.
with 3 phase the rotating field is already set up when power is supplied with single phase you use a capacitor and a second winding to set up the rotating field
Yes, that is one of the major advantages of a three-phase induction motor.
That indicates a fault in the induction motor.
how reversing an ac single phase induction motor to wark as induction generator
A single phase induction motor is mainly used in fans.It is capacitor start capacitor run induction motor.In three phase induction motor squirrel cage induction motor is mainly used in elevators,lifts,cranes.slip ring induction motor is mainly used in electrically driven ships.
The single phase induction motors are made self starting by providing an additional flux by some additional means. Now depending upon these additional means the single phase induction motors are classified as: 1.Split phase induction motor. 2.Capacitor start inductor motor. 3.Capacitor start capacitor run induction motor. 4. Shaded pole induction motor.
Split Phase Induction Motor.
Single phase Induction motor
single-phase induction motor is used in ceiling fan.
why three phase induction motor is delta connected
capacitive start motors start by themselves however a normal single phase induction motor requires a starter motor to 'kick-start' the motor into action.