In a properly designed and installed system, nothing will happen. If you press the start first the contactor or start relays may close energizing the motor briefly but the relay will open and stay open when the stop is pressed.
Make sure the device is on. Hold down the tv (or whichever device you're trying to program) button and the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly, letting it flash until the device turns off. Then press the stop button...and it is programmed. Yay, - Rony
An ActionListener is exactly what it sounds like. It's an interface used by other classes to listen for an action event. The simplest example of this is on a Button. Normally when you add a Button to a Component nothing will happen when you press it. You need to use a button.addActionListener(actionListener) call to make it listen for button clicks.
capacitor start induction run motor
Enter the number, then press the button marked with +/-
The easiest method of doing this is to press the cancel button if it is available. If it is not, you can go into task manager (press control-alt-delete to do this), find the process you want to stop and click the end process button.
You press the "A" and "B" button together to use your engine gear.
press power button and volume down button for 2 or 4 sec in some power button and homescreen button simultaneously
Press and hold the power button and media button simultaneously for 10sec, then release the media button.
Simultaneously press and HOLD the Power button and the Home button, until it makes a snapshot sound.
First press the 'set' button.. hold it and press the 'mode' button... Holding this two button press the 'adjust' button.. That is you will be pressing the 3 button at a time. The 'second' will start blinking. Change it by the 'adjust' button. Swap between 'minute' 'hour' 'date' 'month' by pressing mode button simultaneously. Exit by pressing set button
For Maintenance Required warning light on 2008+ Highlander Hybrid: Start from car in OFF mode. Keep foot off brake pedal, press START/STOP botton twice, reset odometer A & B. While in odometer A, press & hold odometer reset button and simultaneously press START/STOP button to turn off. Press & hold odometer reset button and simultaneously press START/STOP button twice. Wait for the indicator bar to complete reset cycle and then release odometer reset button.
Press and hold mute button on the unit (not the remote). After pressing and holding Mute button simultaneously press and hold power button for 5 to 7 seconds. New password screen pops up - enter 122164. Press OK. Done.
Oh gee i wonder
If you press both the Power button and Home button simultaneously a screenshot of your current screen will be saved to your "Camera Roll". If you hold both the Power Button and Home Button your iDevice will shut down and reboot.
For ios U have to press the home button and the lock button at the same time and then goto photos and then ur picture would be in the camera roll or something like that
simply as soon as you press start hold the shoot and steal button simultaneously. quite simple once you try.
Well if you are talking about the DO NOT PRESS app on an IPod Touch, nothing will really happen. I mean, it will say,after you press the red button again, "*Ahem*, DO NOT PRESS THE BUTTON." After that it will say, "Fine, plan B. PRESS IT! Come on!" (These bonus info are by thelight193) If you are talking about ''do not press the button'' that is in www.gamefridge.com, then just the text changes and some more funny things. It is a addicting game! But very fun! Not inappropriate! All you do is press a button, but IT WILL BE ADDICTING FOREVER!!! thank you for reading this. :P >:( < jk, i like you