Want this question answered?
Generally an area as long as the height of the balloon standing up, with at least 3-4 metres or longer (depending on the size of the balloon) for the crown line that helps stabilise the balloon as it is being inflated. The width should be about half the height, but this can vary as there is some leeway, particularly if there are balloons being inflated together side by side.
The balloon would get larger as the air pressure outside it dropped. At some height, the balloon would get large enough to burst.
Balloon Morphing is when your balloon has ran out of air,and not even knowing it,so you figure it out in like a project.Do some research because I need some research on this project.
-- Inflate the balloon with some substance that is less dense than air. OR -- Inflate the balloon with air, then heat it after it is sealed.
big juicy ear lobes, the size of melons
Generally an area as long as the height of the balloon standing up, with at least 3-4 metres or longer (depending on the size of the balloon) for the crown line that helps stabilise the balloon as it is being inflated. The width should be about half the height, but this can vary as there is some leeway, particularly if there are balloons being inflated together side by side.
Yes this can be done but the process would be really slow. You can try adding some yeast to hydrogen peroxide and let the balloon be tied to the bottle containing that mixture. After couple of hours you will have inflated balloon.
For a balloon that is sealed and not full the volume of air inside the balloon will increase as it is heated. This is not however how hot air balloons work. A hot air balloon is essentially a fixed volume when it is inflated. If the air inside the balloon is heated the air inside becomes less dense so some of the air exits the balloon via the mouth of the balloon. As the air inside the balloon cools it becomes more dense so some air is ingested via the mouth of the balloon to keep it full. With each heating and cooling cycle, the pressure inside the balloon remains constant, the volume of the balloon remains constant but there is this movement of air out of and back into the balloon. P=VT Poop
It creates static electricity.
Yes, helium will help a balloon fly. Helium does not affect the direction that a balloon goes, but it will keep it in the air for quite some time.
The balloon would get larger as the air pressure outside it dropped. At some height, the balloon would get large enough to burst.
Any gas will inflate the balloon. It simply needs to be introduced into the balloon at a pressure greater than that of the surrounding atmosphere (plus some additional allowance for the pressure required, if any, to stretch the balloon material).
At best they can last for several weeks. While there are some isolated cases of Mylar balloons remaining inflated for several months or even years, they are the exception rather than the rule.
If a balloon is placed above boiling water, the heat from the water will cause the air inside the balloon to expand. The balloon will likely inflate and may eventually burst if the heat is not removed or the balloon is not released.
If temperature and volume is fixed,pressure reduces.
If temperature and volume is fixed,pressure reduces.
You have inflated taste buds. That's what's wrong.