0
What happends to the top of a container when it is slowly filled with water?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why is water meniscus convex when the container is fully filled?
The H20 molecules are bound together, it is called surface tension.
How fast does water evaporate in a container?
It affects the rate of evaporation because of the container blocking the direct sunlight toward the water inside the container. The container will probably heat up and get warm first then the water will start to heat up and start to evaporate when it gets hot enough but very slowly due to the indirect sunlight.
What happends when heavy water comes out the muffler?
No heavy water in the muffler.
What observe when slowly squeezed and released the bulb field with water?
When you slowly squeeze and release the bulb filled with water, you will observe that the water inside the bulb will be pushed outwards when squeezed and then flow back into the bulb when released. This is due to the pressure exerted on the water inside the bulb, causing it to move in and out of the bulb.
What happends if you freeze a glass of water?
The glass may break.
Why does the coin placed at the bottom of the container appers to be raised when the container is filled slowly with water?
it is because the view we are seeing the coin is from rarer to denser that is from air to water so the refractive index differs so the view we so the coin at the bottom of the cointer appears to be raised
What is the volume of the stone?
The volume of a stone or any irregular solid non-porous object can be determined by placing the object slowly into a container filled with water up to the very top. The water that runs over the edge of the container must be collected and measured in another container, such as a cylinder type or rectangular/square shape from which a square area can be calculated to determine the displaced volume of water.
Which of the follwing is an example of a container that is filled with a pure substance rather than with a mixture?
a jar filled with salt water
Explain why the container of water must be inverted when a gas is collected by displacement of water?
the collection of a gas over water involves a container in which the reaction takes place and a gas collection container filled with water and inverted in a reservoir of water. ...As the gas is created, it will displace water from the bottle. ...the container must be the sum of the pressures of the gas
How do you separate sandy water from mixtures?
wait for the sand to completely settle, and then slowly pour the water into a different container
Making water look like its flowing?
Simple. get a glass container of some type fill it with water and slowly pour it slowly but steadily into somewhere e.g. the sink.
What will be the weight of the empty container if the fully water filled container weighs 36 kg and the half water filled container weighs 21 kg?
Let the weight of the container be C and the weight of water when fully filled be W. Then C + W = 36 and C + w/2 = 21 Subtracting the second equation from the first gives w/2 = 36 - 21 = 15 Then W = 2 x 15 = 30 : As C + W = 36 then C = 36 - W = 36 - 30 = 6 kg. The empty container weighs 6 kg.
How can you relate temperature and volume with pressure?
if you have a closed bottle or can, etc. , of water and you heat it up to a high enough temperature, then pressure builds up, right? Well if the container is filled with water then the pressure will build up faster, causing the container to burst, but if the container is only filled maybe halfway, it will take a little longer for the pressure to build up enough to cause the container to burst.
The container for your Hogarth arrangement should be?
tall ceramic vase filled with wet foam that has room for water
How can you find your volume?
An easy and low tech way to find the volume of an object is to measure the volume of water it displaces. Fill a container that has lines for measuring volume on it with enough water to fully submerge the object whose volume you will measure, but don't fill it all the way to the top. Write down the amount of water you start with, let's say 1 liter. Now put the object you want to measure into the water carefully so that you don't splash any water out and make sure that it is fully submerged. Now write down the new volume of water in the container, let's say it now reads 2.5 liters. Subtract the original volume from the new volume to find the volume of your object: 2.5L - 1L = 1.5 liters. Another way to find the volume of an object fill a container with water to the very top of the container. Place that container of water into an empty larger container. Put the object that you want to measure into the container of water slowly so that you don't spill any more water than the object pushes out on its own. When the object is fully submerged, it should have pushed out some water into the larger container. To ensure accuracy, the level of water in the water filled container that now also contains the object to be measured should still be at the very top of the container. Carefully remove the water/object filled container from the larger container so as to not spill any more water. Carefully pour the overflowed water into a smaller measuring vessel to find the volume of your object.
Why is water meniscus convex when the container is fully filled?
The H20 molecules are bound together, it is called surface tension.
What is the mass of the water If a cubic container 50cm on a side is filled with water?
The container is a cube, therefore if one side if 50cm each side is 50cm. As such, the volume of the cube is 50x50x50, or 125,000cm3. Pure water weighs 1g/millilitre, and 1mL is equal to 1cm3. Therefore the mass of water in the container is 125,000g, or 125kg.
