Want this question answered?
too. To indicates direction. I'm going to the bathroom. Too emphasizes something. Too thick, too fast, too big.
A fuse.
It is a fuse, a piece of metal wire, usually in a glass tube, that can only just carry the maximum allowed current. A current greater than the maximum allowed will melt the wire.
The heating effect is used. Normally the current flows through the fuse without undue heating. But if too much current passes through, the fuse will heat and melt, thus stopping the current which could cause a fire if it was not stopped.
This would not be a hypothesis, but an explanation. A fuse is a piece of wire with a low melting point which melts if too much current flows in the circuit. It is designed to break before the rest of the circuit is damaged.
too. To indicates direction. I'm going to the bathroom. Too emphasizes something. Too thick, too fast, too big.
faulty wiring or too low of a fuse, shorting out because the wire is touching metal or another wire
A fuse.
The essential component of a fuse is a metal strip that or wire that melts when too much current flows through it.
It melts (fuses).
No, as soon as you turn on the appliance the wire inside the fuse will melt as there will be too muck current flowing through it
To fix a burned wire that is plugged in at the fuse box under the Battery sign, the wire will have to be removed and a new one soldered in place. Before doing this, find the cause or overload that caused this wire to burn in the first place. It could be that a fuse of too high an Amp was placed in the fuse box by mistake.
By doing that you defeat the purpose of a fuse. The fuse is there to protect the wiring from an overload or short which could cause the wires to overheat and catch on fire. By replacing the fuse with a wire or fuse that is too large all the protection is gone and your car could catch on fire at any moment.
the circuit is broken.
Direction of the magnetic lines too would get changed
A fuse wire, or fusable link, is just another form of a fuse and operates much in the same fashion. Too much current draw and poof, it blows. You could replace a fuse wire with a fuse and fuse block but fusable link is much cheaper to manufacture and is good for quick assembly and or limited space.
A fuse blow when ever the amperage is to high for the circuit. Either there is a short (to ground or positive), the connections are corroded, wire gauge is too thin or it is the wrong fuse. Never put in a fuse larger than recommend for the circuit, it could cause a fire.