Nothing in particular, or at least, nothing different than if you wrapped a wire around anything else and did the same thing. Mobius strips are not magic, and it doesn't really matter (much) to the wire what shape it's in. As far as the electric current is concerned, it's the same as any other loop.
Direct current is a flow of electricity which only goes one way. Batteries, for example, produce direct current, so the current must flow all the way through a circuit and back into the battery to work. Alternating current is what comes out of a wall outlet, and it alternates in both directions, with current flowing in and out of the outlet.
friction that the answer
Direct Current Positive - the starting point at which the electrons flow through the wire circuit. These electrons are fully charged, ready to expend their energy into the various points in the circuit, be it a lightbulb etc Direct Current Negative - the return point of the finished electrons into the battery to collect more energy to enter the circuit again.
A diode will let current pass through only in one direction. Note that this will result in a pulsating current; to make the current more regular, you also need capacitors.
Direct Current
in an adjacent coils ,the current flows in same direction so there is force of attraction shortening the coils.
The coil will align itself with the magnetic field (poles) of the magnet.
Yes.
Nothing is produced just by putting electric current through a soft iron core. It needs wire to be be wound around it in a certain fashion, then it may produce direct current.
DC = direct current.
Direct current is a flow of electricity which only goes one way. Batteries, for example, produce direct current, so the current must flow all the way through a circuit and back into the battery to work. Alternating current is what comes out of a wall outlet, and it alternates in both directions, with current flowing in and out of the outlet.
It's called Alternating Current (AC) as opposed to Direct Current (DC/batteries).
direct current.
If the furnace is direct ignition, The HSI or spark ignites the flame. A flame sensor passes current through the flame, if current is present the main.
friction that the answer
Direct Current Positive - the starting point at which the electrons flow through the wire circuit. These electrons are fully charged, ready to expend their energy into the various points in the circuit, be it a lightbulb etc Direct Current Negative - the return point of the finished electrons into the battery to collect more energy to enter the circuit again.
There is only one type of direct current and its 'frequency' is zero.