Want this question answered?
the windward side gets lot of rainfall
There will be sand deposition at the side which is facing the current, while there will be erosion on the other side.
it changes
complementary nucleotides
The elements on the left side are metals. They lose electron to form cations.
I've added a couple of related links below that should help you out.
Inverted U-tube manometer is used for measuring pressure differences in liquids. The space above the liquid in the manometer is filled with air which can be admitted or expelled through the tap on the top, in order to adjust the level of the liquid in the manometer. Equating the pressure at the level XX'(pressure at the same level in a continuous body of static fluid is equal), For the left hand side: Px = P1 - rg(h+a) For the right hand side: Px' = P2 - (rga + rmgh) Since Px = Px' P1 - rg(h+a) = P2 - (rga + rmgh) P1 - P2 = (r - rm)gh If the manometric fluid is choosen in such a way that rm << r then, P1 - P2 = rgh. For inverted U - tube manometer the manometric fluid is usually air.
It then is no longer a 6 sided hexagon but becomes a 7 sided heptagon
The function of the syringe in the respirometer practical is to make fine adjustments to the level of the manometer fluid, to ensure it is the same on either side.
nothing Assuming you mean for example you add a side to a pentagon to get a hexagon, then the sum of the interior angles increases by 180o.
For a very basic explanation, a manometer measures the pressure differential between a closed pressure applied at one end and an open pressure at the other. For example. If you have a typical u-bend manometer and you apply an air pressure at one end, the liquid will raise correspondingly, as the pressure on the closed side increases more and more above the ambient air pressure. The amount it rises depends on the density of the liquid used and the diameter of the tubing. So basically a manometer uses the height of a liquid to translate the amount above ambient air pressure, which is considered zero, of your pressure source.
Nothing happens; it remains the shortest side forever!
low side never charge from high side
Primary is the main thing that happens. The side effect is what happens because of the Primary thing.
margin that is added to the top of the page
For a very basic explanation, a manometer measures the pressure differential between a closed pressure applied at one end and an open pressure at the other. For example. If you have a typical u-bend manometer and you apply an air pressure at one end, the liquid will raise correspondingly, as the pressure on the closed side increases more and more above the ambient air pressure. The amount it rises depends on the density of the liquid used and the diameter of the tubing. So basically a manometer uses the height of a liquid to translate the amount above ambient air pressure, which is considered zero, of your pressure source.
1. Remove the stove top cover and remove one of the burners assemblies.2. Attach the long end of the manometer tube to the burner outlet and turn that valve to the on position.3. Open the valve at the propane tank and then light one of the other burners on the stove top. Once the flame is established and burning steadily turn it off and shut the valve at the propane tank.4. Bleed off the pressure until the manometer reads 8 inches water column. You may want to light a burner to burn off this gas. This is done to equalize the pressure across the regulator, to be sure that more gas is not fed through the regulator to the low pressure side.5. Let everything stand this way for 15 minutes - if the manometer drops any amount, you have a leak in the system.