You will be electrocuted.
Warning - sticking any metal object into a power outlet can cause severe injury or death!An AC power outlet can short or ground out if a metal object touches or nears the contact blades inside. You could be electrocuted. Never place any object other than an intact, approved electrical plug into a power receptacle.
Well the metal would obviously attract a charged particle for its charge less surface. The only possible way would be placing a positively charged object on the other side of the negative charged object such that it could counter effect the coulombian pull on the negative charge due to the metal. To keep the positive charge in place it would need to place it within oppositely charged electronic plates. This needs more amendments but thats another topic. When a charged object touches metal, the end result is usually what is known as a static shock.
It will not move from it's place
It will get wet.
Density is the mass of the object divided by its volume. By this principle, to determine the density of a metal, place the metal onto a scale to measure its mass. After this, place the metal into a beaker of water and measure the volume change in the beaker. Divide the mass by the volume and you get the density.
To securely mount a heavy object to metal studs, use toggle bolts or heavy-duty anchors designed for metal studs. Pre-drill holes in the metal studs, insert the anchors, and tighten them securely to hold the object in place. Make sure to distribute the weight evenly and use multiple anchors for added support.
It sinks. (the object weighs more than the water displaced.)
[object Object]
To replace an electrical outlet in your home, first turn off the power to the outlet at the circuit breaker. Use a screwdriver to remove the cover plate and screws holding the outlet in place. Carefully disconnect the wires from the old outlet and connect them to the new outlet in the same way. Secure the new outlet in place, replace the cover plate, and turn the power back on to test the outlet.
Shop - online market place "outlet"
It will be pushed away from the source of the electric field.
A top loading balance is a digital instrument that is used to measure the mass of an object. It consists of a metal plate to place the object and a digital read out the measures in the S.I. unit gram.