It is reflected
shine a ray from a ray box into a glass prism onto a black background
open the glove box then cut the back out of the glove box then shine a flash light in to the engine compartment and there they are.
You will see what some people call a rainbow, the differing refraction of light frequencies
he built it whit a 4 glass boxes one in side each other so the light can shine through the glass box to heat his food he is horace de saussure
It absorbs all colors in the white light, except for the blue, which it reflects and scatters, and it winds up appearing blue to our eyes. That's a big part of the reason why we call it "a blue box".
If your laminate didn't shine out of the box, nothing will really shine it. A clean floor shines more then a dirty one. Use a good laminate cleaner, like Pergo's.
easy. shine is when a light is falling on something. so there would be shadowing involved. for example, if the sun was shining on one side of a box then the other three sides would be shaded because the light would not be hitting it. reflection is when an image is produced that is the same as another. an example is someone looking into a mirror, their face is reflected. or when trees and mountains are reflected on the water.
It happens when the green light on the power button on the x-box or x-box 360 system turns red and the system cannot be saved due to misuse of the system beyond repair.
If the laminate didn't shine out of the box there is no viable option to shine it. Products like Murphy's oil soap only create a mess. The way these floors are constructed they are not easily repaired or modified like hardwood.
If it has a glove box light the light will be located inside the glove box. Just look and see if there is one.
Most light boxes are not rated to support a ceiling fan. If you look at the box you should be able to see some marking on it telling you that it is rated for ceiling fans. Another way to tell is to look at the size of the screws that are used to mount the fixture to the box. In ceiling fan boxes the screws will be #10 in light boxes they will be #8. A common way to mount ceiling fans securely is to mount the fan onto the framing member directly. Since the light box is usually mounted to the structure of the building it is usually not too hard to mount the fan directly to the building structure too, and not to the light box.
The light comes on and you can see what you are doing. The following day you will find a layer of yellow ice in the ice box.