0
What happens when you touch a piece of iron to a permanent magnet?
Wiki User
∙ 13y ago
It mean to push away
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Permanent magnet how do i make a magnet?
To make a magnet you can do it three ways. No1. Get a metal rod and wrap some Insulated copper wire around it. You can use some other wires but it might not work as well. Make sure the wire isn't too thick. Wrap the wire 50+ times. Connect the two ends of the wire to a battery. Don't connect it to a strong power source as it will get very hot very quickly. Now the iron rod now has become a weak permanent magnet. The more current you add to it the more stronger it will be and the longer you have the battery on the stronger it will be.. Also, don't drop it as it will lose it's magnetic properties. No2. Get a magnet. The stronger the better. Rub the magnet up a piece of metal then when you get to the end take the magnet off the metal and take it back to the start making sure the magnet doesn't touch the metal. I don't really like this method as it takes a long time to get the metal to pick up anything decent. No3. Get a magnet and let it stick to a piece of metal. The piece of metal will be weak but enough to make the needle on a compass move. (Don't ruin a compass. Mine point south-west and it shouldn't do that...)
How do you make a permanent magnet?
To make a magnet you can do it three ways. No1. Get a metal rod and wrap some Insulated copper wire around it. You can use some other wires but it might not work as well. Make sure the wire isn't too thick. Wrap the wire 50+ times. Connect the two ends of the wire to a battery. Don't connect it to a strong power source as it will get very hot very quickly. Now the rod is a magnet until the battery dies or you cut off the current. Also; now the iron rod now has become a weak permanent magnet. The more current you add to it the more stronger it will be and the longer you have the battery on the stronger it will be.. Also, don't drop it as it will lose it's magnetic properties. No2. Get a magnet. The stronger the better. Rub the magnet up a piece of metal then when you get to the end take the magnet off the metal and take it back to the start making sure the magnet doesn't touch the metal. I don't really like this method as it takes a long time to get the metal to pick up anything decent. No3. Get a magnet and let it stick to a piece of metal. The piece of metal will be weak but enough to make the needle on a compass move. (Don't ruin a compass. Mine point south-west and it shouldn't do that...)
Does a magnet need to touch the paper clips to excert and attractive force?
You need to do the experiment. If the magnet is strong enough, metal (steel, iron) will jump to the magnet (or pull the magnet towards it).
How do you make a magnet?
You can make a magnet three ways:No1. Get a metal rod and wrap some Insulated copper wire around it. You can use some other wires but it might not work as well. Make sure the wire isn't too thick. Wrap the wire 50+ times. Connect the two ends of the wire to a battery. Don't connect it to a strong power source as it will get very hot. I connected mine to a 1.5 volt battery and it could lift up my scissors then drop them again.(Note: The iron rod now has become a weak permanent magnet. The more current you add to it the more stronger it will be and the longer you have the battery on the stronger it will be.. Also, don't drop it as it will lose it's magnetic properties.)No2. Get a magnet. The stronger the better. Rub one end only of the magnet up a piece of metal then when you get to the end take the magnet off the metal and take it back to the start making sure the magnet doesn't touch the metal. I don't really like this method as it takes a long time to get the metal to pick up anything decent.No3. Get a magnet and let it stick to a piece of metal. The piece of metal will be weak but enough to make the needle on a compass move.
When you touch a magnet to a steel nail the nail attracts steel paper clips. Explaine why this does not happen when you use an aluminum nail?
it wouldn't be magnet to a aluminum nail because the aluminum is not a way of magnet and a steel nail would because steel is a way of magnet.
Of a ferromagnet an electromagnet a temporary magnet or a permanent magnet which is easy to create but loses its magnetism easily?
The temporary magnet becomes a magnet in a strong magnetic field, but its magnetic properties will disappear when that field is taken away. The ferromagnet and the permanent magnet are essentially the same thing. The electromagnet isn't that easy to make compared to the temporary magnet. Let's conduct an esperiment. If we take a bar magnet and pick up a paperclip with it, we can use the paperclip on the end of the magnet to pick up another paperclip. The second paperclip we are picking up only needs to touch the first paperclip; it does not have to touch the magnet itself. When the magnet is taken away, the paperclips no longer exhibit magnetic properties. They were acting as temporary magnets, and the simple and easy removal of the magnet cause them to lose their magnetism.
What happens to a magnet when copper rubs aganist it?
It might leave a copper coloured streak across the magnet, but apart from that, nothing much. I think you are looking at what happens to a copper wire when it is moved in a magnetic field. In which case the answer is, a current is induced in the wire. (It does not have to touch)
What will happen to your iPod touch if a magnet touches it?
if a magnet makes any type of connection with your ipod touch, it will either disable your ipod or kill it!
Permanent magnet how do i make a magnet?
To make a magnet you can do it three ways. No1. Get a metal rod and wrap some Insulated copper wire around it. You can use some other wires but it might not work as well. Make sure the wire isn't too thick. Wrap the wire 50+ times. Connect the two ends of the wire to a battery. Don't connect it to a strong power source as it will get very hot very quickly. Now the iron rod now has become a weak permanent magnet. The more current you add to it the more stronger it will be and the longer you have the battery on the stronger it will be.. Also, don't drop it as it will lose it's magnetic properties. No2. Get a magnet. The stronger the better. Rub the magnet up a piece of metal then when you get to the end take the magnet off the metal and take it back to the start making sure the magnet doesn't touch the metal. I don't really like this method as it takes a long time to get the metal to pick up anything decent. No3. Get a magnet and let it stick to a piece of metal. The piece of metal will be weak but enough to make the needle on a compass move. (Don't ruin a compass. Mine point south-west and it shouldn't do that...)
Can two same sides of a magnet touch?
No.
Is Refrigerator magnet Electromagnet?
The magnets that stick to the front of a refrigerator are permanent magnets, not electromagnets. There is also a permanent magnet embedded in the door seal of most domestic fridges to keep the door shut.add All magnetic fields are caused by the movement of electrons. In a permanent magnet, several of the electrons have their spin axes aligned, thus creating the magnetic field. [From the math, conceptually there could be a magnet monopole, but no one has found one yet.]In an electromagnet, the current of the electrons along the wires creates the external magnetic field.The way a permanent magnet (eg frig magnet) works is that the magnet induces a magnetic field of opposite sign in the sheet steel of the frig body, and the permanent magnet and the induced field attract each other.Have a crack at ferromagnetic, and paramagnetic in your favourite on line encyclopedia.
How do you make a permanent magnet?
To make a magnet you can do it three ways. No1. Get a metal rod and wrap some Insulated copper wire around it. You can use some other wires but it might not work as well. Make sure the wire isn't too thick. Wrap the wire 50+ times. Connect the two ends of the wire to a battery. Don't connect it to a strong power source as it will get very hot very quickly. Now the rod is a magnet until the battery dies or you cut off the current. Also; now the iron rod now has become a weak permanent magnet. The more current you add to it the more stronger it will be and the longer you have the battery on the stronger it will be.. Also, don't drop it as it will lose it's magnetic properties. No2. Get a magnet. The stronger the better. Rub the magnet up a piece of metal then when you get to the end take the magnet off the metal and take it back to the start making sure the magnet doesn't touch the metal. I don't really like this method as it takes a long time to get the metal to pick up anything decent. No3. Get a magnet and let it stick to a piece of metal. The piece of metal will be weak but enough to make the needle on a compass move. (Don't ruin a compass. Mine point south-west and it shouldn't do that...)
What happens if you touch the screen at the theatres?
You'd most likely get kicked out, but it's mostly just a giant piece of stretched cloth.
Does a magnet need to touch the paper clips to excert and attractive force?
You need to do the experiment. If the magnet is strong enough, metal (steel, iron) will jump to the magnet (or pull the magnet towards it).
In building an electrical generator does the the magnet have to touch the spinning copper or does it not matter?
no, magnet needs to be close to winding, not touching it
What happens if you touch a snake?
if you touch a snake nothing happens
What HAPPEND when you negative and negatives magnets touch?
Negative and negative sides of a magnet do not touch. opposites attract. Negative and positives touch.
