Arm
Base
Arm
The "base" supports the microscope. The "arm" holds the eyepiece, bodytube, fine and coarse adjustment knob, nosepiece, and the high and low power objective which connects to the "base. "
Always carry a microscope with two hands. Place one hand under the base of the microscope and hold the arm with the other hand. Do not allow the microscope to drop or bump into anything while carrying it. This could damage the microscope or cause small pieces to break off that could cause a tripping hazard. Touching the microscope lens can smudge or damage it. Always use lens paper or a soft cloth with a small amount of isopropyl alcohol to clean a dirty microscope lens. Remove slides and cover slips from the stage before storing the microscope, and rotate the nose piece so that the smallest power objective is facing the stage. Place a dust cover over the microscope when storing it to prevent dust and dirt from damaging the machine. Read more about Microscope Saftey Procedures in the related link.
You should hold the arm and the base of the microscope.
Base
Arm
base of the microscope and the arm / stage or stage clips
base of the microscope and the arm / stage or stage clips
base of the microscope and the arm / stage or stage clips
base of the microscope and the arm / stage or stage clips
base of the microscope and the arm / stage or stage clips
supports the stage in a microscope
The Function of a base in a microscope, light microscope that is, is to provide the stage with a light source as well as provide a support for the lens of the Microscope.
The stage of the microscope should be kept clean and dry A microscope must always be carried with both hands. One holds the limb while the other is placed under the base to provide support
is where the arm of the microscope connects to the base of the microscope
malay ko