It sounds like you are talking about Hellraiser 3, and the Cenobite that has the piston head is played by Kevin Bernhardt. His Cenobite name is rather astutely...Pistonhead.
Se7en
barney and freinds get shot in the head and horror movie 2
The movie was Re-animator
One of the parts in the piston are the piston head,
Horror Head was created on 1992-07-06.
To get the area of a piston, you need to measure the diameter or radius of the piston head and use the formula for the area of a circle (A = πr^2) where r is the radius of the piston head. Once you have the radius, plug it into the formula to calculate the area of the piston head.
The volume between the engine head and piston when the piston is in the head dead center piston R - is expressed in cubic inches
A cotter joint is used to connect the piston rod with a cross-head...
Disassemble it as far as you can then take it to an automotive machine shop. They'll need to magnaflux and bore the engine and head(s) before you can trust it. They'll get the piston out and if the block isn't damaged beyond repair they can help get your engine back into shape.
No. The bolts may line up to actually put the head on, however your horsepower is due to the matching of the piston head with the cylinder head to produce an even flame across the top of the piston. It is important that the radius on the piston matches the radius on the head. The head on the 380 will not match up to the 250 due to the larger piston volume of the 380 vs the 250 or 300.
You are not alone I don't remember the title, and I'm looking for it also. The head with the spine is floating in the air in a room.
queen of hearts because she has the bigger head more room for air