In the USA it is the female socket on the walls of a house where you plug in your TV or coffee pot. There should be several on every wall of the house about one foot above the floor plus higher up on walls in the kitchen cooking area.
Volts is the measurement of potential. Hertz is measured in cycles per second, the North American grid operates at 60 cycles per second. Generally true but if you put an oscilloscope on the line you will find that 60 cycles is an average. I have found 50 to 60 cycles more often.
220/240 volts in most European country's and 110/120 volts in USA but the sockets are incompatible and you may need an adapter for using a US sold device in an European country. Most devices have a switch on the back to adjust the voltage.
That is the standard AC voltage level that is supplied to the publics buisnesses and communities in the United States.
You have not supplied enough information. 110 Watts / __Amps = __Volts
EVERYTHING in the U.S. that plugs into a common 3-prong household outlet.
You'll know. 220 has a different outlet arrangement.
In the US all microwaves operate on 110 volts.
Yes. Circuits in a home are 120 volts but people tend to call them 110 volt circuits. The 120 volts you read on the appliance is the maximum voltage the appliance can handle. The actual voltage you will read at any outlet will range from 110 to 120 volts.
We have two bulb in parallel debiting 75 + 40 = 115 watts under 110 volts. I -current amperes V -potential volts W -power watts R -resistance ohms knowing W = V*I V = I*R W = R*I2 Then: 115 watts = 110 volts * I => I = 115/110 = 1,045 amperes R = 115/(115/110)2 = 1102 / 115 = 105,217 ohms ------------------------------------------------------------------------------------------- Another way: First get the resistance of each bulb. Then we know that Rparallel = 1/(1/R1 + 1/R2 ) 75 watts = 110 volts * I => I = 75/110 ampere. R1 = 75/(75/110)2 = 1102/ 75 = 161,333 ohms. for the other bulb 40watts = 110 volts * I => I = 40/110 ampere. R2 = 40/(40/110)2 = 1102/ 40 = 302,5 ohms. meaning Rparallel = 1/(1/161,333+1/302,5) = 105,217 ohms That it's
The transformer outside your home reduces the voltage from several thousand volts to around 220-240 volts in your home. In some countries (US and Canada among others) this will be split to 110-120 volts.
The "force" that pushes an electrical current is the voltage. It isn't really a force, but it may help to visualize it as such. Physically, it has different units than a force.
The United States is one country that uses 110 volts. Also, Mexico and Canada are also other countries that use 110 volts.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
110 volts
A three phase panel will not give you 110 and 220 volts. A three phase four wire panel will, but not at these voltages. The nearest voltages will be 120 and 208 volts. The 120 volt is the wye voltage of 208 volts. 208/1.73 = 120 volts. A single phase three wire panel will give you 110 and 220 volts.
Of course not, that's 10 volts difference.
In the US all microwaves operate on 110 volts.
Yes, the standard single-phase electrical system in the US is 110/120 volts at 60 Hertz.
In Europe you cannot bye an oven using 110 volts. The word is not only the USA. Actually, most US electric ranges use 220 volts. Microwave ovens and toaster ovens are 110.
The United States is one of the only places in the world that uses 110 volts instead 220 volts. In order to operate 208 volts on a 110 volt electrical current, you will need a voltage converter.
One breaker in the North American electrical system will supply 110 volts. Two adjacent tied breakers will produce 220 volts.
110 volts