Yes. Circuits in a home are 120 volts but people tend to call them 110 volt circuits. The 120 volts you read on the appliance is the maximum voltage the appliance can handle. The actual voltage you will read at any outlet will range from 110 to 120 volts.
Yes, the 130 volts you read on the bulb is just the maximum it will handle. It will work perfectly in a 120 volt circuit.
Yes, the 130 volts you read on the bulb is the maximum it will handle. It will work perfectly on a 120 volt circuit and will actually last longer than a standard 120 volt bulb.
Can you use a 120 volt bulb in a 130 volt socket?
240 ohms
6
Yes, the two voltages are in the same voltage range.
The appliaance is designed for 110-120 v so if it is fed at 115 v that is quite OK.
No, a 240 volt device runs on 240, and a 120 volt device runs on 120. Attempting to run a device on incompatible voltage results in damage.
Yes, normally, assuming it's 60 cycle (hertz) AC. In the USA, 110 volts as such is no longer used, it's really 120 plus or minus about 5 volts everywhere.
You will have trouble plugging a 220 volt appliance into a 110 volt outlet because both have different polarities for the plug and receptacle that make it impossible for that action to happen.Altering the plug isn't too good of an idea, as the voltage demand of the appliance would be too heavy for the wiring.
Yes
The voltage cannot just be increased in a circuit because there is a risk of damage, blown circuit breakers and/or fire. However an appliance desgined to run on 220 v will use 6/11ths of the current used by an identical appliance designed for 120 v.
Probably not, but I have yet to see a 150 volt appliance as this is a non-standard voltage. If you are referring to a 115 volt appliance then the answer is yes you can as 110/115/120 volts tend to be used interchangeably in practice and are close enough together to not affect operation of the appliance.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.
Yes. All Canadian regular household outlets work at 110-120 Volts.
Only use 110-120 volt appliances on a 110 volt socket.
Typically residential voltage may range from 110 to 120 volts so there should be no problem.