The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
Watts = amps x volts. Amps = Watts/volts = 200/12 = 16.66.
Ohm's Law states Volts = Amps x Resistance. You would need to apply 600 volts across 3 ohm load to have 200 Amps flow in circuit. Not sure what you are really asking and why you mentioned 2 gauge.
All over Europe we have now 230 volts. Its all history and politics. World map of voltage and frequency: http://en.wikipedia.org/wiki/Image:WorldMap_Voltage%26Frequency.png Cheers ebs
Not unless the device is running at less than 333 volts.
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
200
Watts = amps x volts. Amps = Watts/volts = 200/12 = 16.66.
YES!If you have a TV antenna amplifier rated at 12 Volts and 200 milliamps, you can use any power supply that will deliver at least 200 milliamps at 12 Volts. The important item is to keep the 12 volts at 12 volts. note: 200 milliamps is 0.2 amps. Even if you had a power supply that delivered 2000 amps at 12 volts you would be OK as it will only draw the 200ma that it needs.
0.2
Ohm's Law states Volts = Amps x Resistance. You would need to apply 600 volts across 3 ohm load to have 200 Amps flow in circuit. Not sure what you are really asking and why you mentioned 2 gauge.
Two Hundred
1.36 volts Ohm's Law: Volts = Amps * Ohms
I think 1 volt/bar when expressed in db you need to add 200 db to get reading in volts per micro pascal.
All over Europe we have now 230 volts. Its all history and politics. World map of voltage and frequency: http://en.wikipedia.org/wiki/Image:WorldMap_Voltage%26Frequency.png Cheers ebs
This depends on the size of the generator itself. The smaller the generator, the more RPM's will be needed to generate 200 volts in an A/C system.