0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many circuits can share one neutral?
Yes, this is done on star (wye) systems where one neutral is used for three phase wires. e.g. 120/208 voltage system.
At what frequency is voltage generated in the Bahamas?
In the Bahamas they use 120/240 and 120/208 voltage at 60 Hertz.
How do you convert 208 v 2160 Amperes to KVA?
To convert amps to kVA, you use the following formula: Amps = (kVA x 1000 / voltage) / 1.73
How many wires do you need for a 208 v circuit?
208 v is a three-phase supply voltage used in North America, carried on a 4-wire system. The voltage between one of the three live wires and the neutral wire is 120 v and a single-phase supply can be taken by using one live and the neutral. If in doubt about the connection consult an electrician.
How many amps does 42kw in a 3 phase system 120208 convert to?
You would use the 208 voltage which is a three phase voltage, the 120 volts is each leg to ground or star point. The formula for Amps = kw x 1000/1.73 x Volts x pf. Pf = power factor.
Can you connect a 277V ballast to 208V line service?
No. A 277 volt ballast needs the correct voltage to operate. The 277 voltage is derived from the star point voltage of a 480 volt three phase system (277/480). The 208 voltage is a three phase line voltage whose star-point voltage is 120 volts (120/208).
What is 122 08 voltage?
122/208
How do you meter a 208v load meter only 1 phase add the two?
The voltage 208 is a three phase voltage. Single phase is classed as the voltage obtained from any two legs of the three phase voltage system. The voltage between L1 to L2 = 208. L2 to L3 = 208 volts and L3 to L1 = 208 volts. To measure the load of the 208 volt device just clamp an amp meter around one of the legs coming from the load. This will give you the amperage that the load draws.
What voltage should 208 3 phase leads read?
From line-to-line (any two of the three leads) voltage or 'line voltage', the voltage is 208 V. The line-to-neutral (one of the three leads and the neutral conductor), or 'phase voltage', is 120 V.
How does 120 volts come from 208 volts?
208 is a three phase wye connection voltage. To obtain the each individual coil voltage the 208 is divided by 1.73 which equals to 120 volts. Hence you have 3 phase 208 voltage on the phase legs and 120 volts to the wye point which is grounded. This same formula is used on any 3 phase system. 600/347, 480/277, 208/120.
Is there a 208 voltage?
Yes. Usually can be found in commercial establishments.
Does a 208 volt outlet need a neutral?
No a 208 volt outlet does not need a neutral. 208 volts is the line voltage between any two legs of a three phase 208 volt system.
How many circuits can share one neutral?
Yes, this is done on star (wye) systems where one neutral is used for three phase wires. e.g. 120/208 voltage system.
At what frequency is voltage generated in the Bahamas?
In the Bahamas they use 120/240 and 120/208 voltage at 60 Hertz.
How do you convert 208 v 2160 Amperes to KVA?
To convert amps to kVA, you use the following formula: Amps = (kVA x 1000 / voltage) / 1.73
How many pages does The Physics of Star Trek have?
The Physics of Star Trek has 208 pages.
How do you switch the voltage requirement for a cooktop from 208 volts to 110volts?
You don't. The cook top was designed to operate on 208 volts. This is the voltage needed to get the elements up to their rated wattage to do the cooking. Higher wattage appliances do not operate on the lower voltage because of the size of the wire that is needed to feed the appliance.
