what is the torque pattern for ford 302 heads?
Yes , you would have to unbolt the headers from the cylinder heads
THESE HEADS CAME OFF 60"S MODEL NOVAS CHEVELLES AND SOME 302 CAMARO
Cleveland heads...
The 302 boss has slightly bigger heads, it comes stock with 351 Cleveland heads.
The Boss 302, being a V8, had two valves for each cylinder, an intake and an exhaust=16. 32,it had 32 four per cylinder. The same heads were used on the 351 clevland in 71-73.
Yes, if it's a 302 and not a 4.6 like in the newer mustangs the 302 and all aftermarket 302 heads should fit.
It is on the back of the block between the cylinder heads at the very top where the intake manifold meets the block
the cylinder walls are thicker but you can still swap the heads from a 351 winsor to a 302 and also the stroke is longer kinda like the 302 is a stroked 289.also if the motor is together the intake is much wider than a 302
pretty much any 302, or 351 heads will fit
Cylinder heads can be bought in bulk from Sportflo in South Africa or try American Cylinder heads if based in the US. For other buyers try Bridge Cylinder Heads in Cheshire, UK.
The lifters are in the cylinder heads.The lifters are in the cylinder heads.