what is hysteresis losses
Just like a transformer, the core losses are a combination of eddy current losses and hysteresis losses.
Give a brief idea of principle of hysteresis motor,application.
Hysteresis and eddy current loss constitute core loss. It can be reduced by replacing solid core by laminated core... by adeeb
Hysteresis losses depend on the type of metal used to manufacture the magnetic circuit of a machine. Most magnetic circuits are made from silicon steel. Generally speaking, there's not much you can do to reduce hysteresis losses as that has already been factored in by the machine's designer.
hysteresis loss = N1/N2 R2/R1 C1/A1 (area of the loop)(vertical sensitivity) (horizontal sensitiivity
Because that's the very definition of hysteresis. The reason there is hysteresis is because some energy is required to change the magnetization of many materials - you can compare this to a type of friction, though the details vary from the usual friction.
to reduce the eddy current loss in the machine
A comparator will trigger at a set point as deigned Without hysteresis if the level is there for a very long time it will have the effect of oscillating back and forth . hysteresis is feedback to insure a dead band whereby it has to be one state or the other
this area represent the energy lost per cycle in ferromagnetic material during the magnetization process by hysteresis and in some cases also by eddy current magnetic losses and electric losses
what is hysteresis losses
It is a special type of synchronous motor.It works on the principle of hysteresis and the torque is produced due to hysteresis
can Hysteresis motor use like alternator
Just like a transformer, the core losses are a combination of eddy current losses and hysteresis losses.
max hysteresis = max(O_decreasing - O_increasing) / (O_max - O_min)
The material used in the manufacture of transformer cores must have a hysteresis loop with a very small area, as it is the area of the hysteresis loop that determines the hysteresis losses of the core material. The core material should also be resistive, in order to reduce eddy current losses (which is further improved by laminating the core). Many transformer manufacturers use their own variations on what is basically a silicon-steel.A hysteresis curve, or loop, is a graph of flux density plotted against magnetising force, and basically describes the ease (or difficulty) with which the core material can be magnetised and demagnetised as the magnetising current changes magnitude and direction.
Hysteresis - 2012 was released on: USA: 1 October 2012