Lexan is the brand name for polycarbonate sheet and resin in a wide range of grades.
Balance sheet is the record of Assets and Liabilities.
What are benefits to a financial balance sheet?
the sections of a balance sheet is the expense, revenues, and the sales.
i downt no what a spread sheet model is so i can not answer this question.i am terribly sorry.
A bank balance sheet is a financial statement that says what the balances of your accounts are and the activity.
Lexan is a polycarbonate plastic. Fiberglass is exactly that, fibers of glass bound together with a resin.
Polycarbonate
Most riot shields list the material of construction as Lexan, the trade name for the polycarbonate polymer. The young's modulus of polycarbonate is 2.0-2.4 GPa (gigapascals).
You can buy the panels on multiple websites. One site I found is www.eplastics.com Home Lexan Polycarbonate. They seem to have different brands to look through.
You can buy a polycarbonate sheet from most DIY and building supply stores, such as Home Depot. They will happily cut the sheet to size for you if you ask them.
The Resistance to Attack by Aviation Phosphate Ester Fluids (of which Skydrol is) with Polycarbonate (Lexan) is listed as "Poor" and Skydrol "Not Recommended."See also the associated links.
A plastic with special coating that is 250 times stronger than glass and 30 times stronger than acrylic.
Usually it's a thin shell(lexan, polycarbonate etc) and then a polystyrene(or similar) foamed liner to provide cushioning.
Polycarbonate is a tough and versatile plastic used in bulletproof windows, cellphone casings and eyeglasses. Dr. Hermann Schnelle of Bayer in Germany invented the polycarbonate resin in 1953, just a week before Dr. Daniel Fox of General Electronics made the same discovery. Lexan is the brand name of polycarbonate.
no
I machined some polycarbonate (Lexan) sheets that dated from 2005 and the white plastic protective film had become very brittle and virtually impossible to remove. Not wanting to do the work again, I tried a few ways to remove the film. A plastic scraper seemed the only way until I heated the film with a domestic hair-drier set to hot. The protective film was softened enough to become very pliable and it came away from the polycarbonate sheet with only a gentle continuous pull, taking care not to disrupt the film as is was released from the sheet. Any marks left by the plastic scraper where the film had to be 'started' were removed with acetone (nail polish remover); polycarbonate is impervious to acetone. Check your sheet is polycarbonate before using any solvent (check some waste or inconspicuous part of the sheet beforehand). Hope this works - it did for me.
Call a resin distributor such as PolyOne if you are looking to buy the raw resin. If you are looking for sheet - there are hundreds of polycarbonate sheet distributors across the country that can provide pricing.