0
This code appears on the odometer display. It is actually "NO BUS", meaning that the communication "bus" (or data path) has been interrupted between the vehicle's powertrain control module (PCM, Main computer) and the dashboard processor (mini computer). On my Durango, the cause was a faulty PCM. Other sysmtoms included having the truck shut down randomly and "check engine" light coming on, but throwing no code at the OBD-II port. Check the connections on the PCM (there should be 3). It is probably mounted in the engine compartment, above the passenger wheel well. If the connections are good, and you can't find any other disconnected wires, it's probably the PCM. A dealer/mechanic must change it, because it needs to be programmed by Chrysler with VIN and mileage. I paid $800. Good luck!
I would suggest that, instead of relying on the previous posters answer you get someone to check the actual connections to and from the components. In my case it was a wire that had rubbed through the insulation. A simple fix that didn't even cost 8 cents.
What else can I help you with?
What does fault code U0009 mean on santa fe?
Controller area network(can) data bus, high speed bus(-) shorted to data bus(+) in short you have a fault in ur system
VW fault code 19456?
Fault code 19456 / EOBD type code P3000 Can data bus, instrumentation- glow plug warning lamp / probale cause wiring, matchingresistor in ECM
What is z bus of power system?
Z bus is using in fault analysis of power system..it represents how much impedance the network offers to the fault current.lower the impedence larger the fault current
Which topology has the most fault tolerance and redundancy?
The star bus topology has the most fault tolerance.
Whose fault is it if a school bus gets into a wreck on icy roads?
The fault if a school bus gets into a wreck on icy roads would be determined by the police officers who investigate the accident. If there was any fault of the school district, it would be decided in court.
Give you C code for bus reservation?
bus regervation
What is a bus fault?
When a fault occurs in the electric bus (electric lines and intersections) due to short circuit between the phases or between 1 or more phase and ground, the current value mounts up to a very high value, which is known as bus fault current. This high value of current may cause damages to the transformers and could also rupture the other electric lines connected to the bus.
What are fault codes P202C-004 on Mercedes?
P202C-004 = CAN BUS signal from EIS controller,CAN BUS signal error
What does the flashing of the leds on a PLC controller mean?
The item for which the LED indicates is in a fault condition. Since there exist many brands of PLCs, there are many conditions indicated such as BUS FAULT, SYSTEM FAULT, I/O FAULT, COMMUNICATION FAULT, and many others.
What network topology would offer the least fault tolerance and redundancy?
Star and Bus
What does the No bus light on a Plymouth neon mean?
it means that one of the fuses in the power distribution center is shot
What is the hack code for bus driver?
Unlock code for bus driver is nothing less than the software for the bus to drive. It needs a software to unlock or run the bus. If you can run it then it may be a firewall or antivirus that block the bus. Try to install the driver and if it didn't work then check firewall or antivirus if it blocks the bus or if any of the above didn't work then it will be the bus that doesn't support by the system that you are currently using. Kyndee2009
