0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will 16 in wheels fit a car with original 15 inch wheels with same lug pattern?
The bolt pattern is only one part of proper wheel fitment. If you are using wheels from a different model car, you also need to be aware of wheel offset and center bore. You should use wheels of similar width and offset so they don't stick out or sit too far in which can cause clearance issues. The center bore needs to be large enough to fit over the hubs on your car. Most cars come with hub-centric wheels to fit exactly on the hub flange, if you use a wheel with larger bore you can get hub rings to center the wheel. On some vehicles you may get excessive vibration by using wheels without the hub rings or the proper hub bore.
What is the PCD and center bore hub for suzuki LJ80 wheel?
PCD: 5x139.7 (5x5.5) CB: 108mm Offset: -10 to 15 mm
What is the full expression of the abbreviation HUB switch?
Hub is not an abbreviation. A hub is the center of a wheel; that's where the name of the networking hub is derived from.Hub is not an abbreviation. A hub is the center of a wheel; that's where the name of the networking hub is derived from.Hub is not an abbreviation. A hub is the center of a wheel; that's where the name of the networking hub is derived from.Hub is not an abbreviation. A hub is the center of a wheel; that's where the name of the networking hub is derived from.
Will caprice rims fit pacifica?
No. The Chevrolet Caprice has a standard 5 X 4.75" lug pattern, with a stud size of 12 X 1.5, and a hub center bore of 78.1. The Chrysler Pacifica has a standard 5 X 5" lug pattern, with a stud size of 12 X 1.5 and a hub center bore of 71.5. Practically speaking, the lug holes will just not match up.
What is the center of a planet called?
The center of a wheel is generally called a hub.
What is the hub bore size on a 6 lug Toyota tacoma?
106mm
What wheels goes on a1999 BMW 7 series?
The wheels you need will have to be 5x120 bolt pattern with a hub bore of 72.5 if I remember correctly. 7 Series E38 = PCD 5x120, center bore 72.5mm and M12x1.5 bolt thread. ET 13-25
The center part of a wheel or circle?
hubHub
Will 20 inch new dodge wheels fit old dodge ram?
no they will not you need to take them to a machine shop so they can bore them out because the center hub is much larger on the older dodges
What is the bolt pattern for a 2008 Volvo C30?
5x105 / 5x4.24 stud size 12x15 hub center bore 65.1 205/55-16 205/50-17 215/45-18
What is in the center of a wheel or circle?
hub
What is the center of the rims called?
The center of the rim for a vehicle tire is called the hub. The hub is where the grease and bearings are that help the wheel turn.
