0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a lathe chuck and what are the types of chuck?
A lathe chuck is a device on the driven spindle on the head (headstock) of the machine that holds the workpiece. It grips and spins it. The chuck has "fingers" called jaws that "pinch" the workpiece between them to secure it. Chucks can be 2-, 3- , 4-jaw or more. And the chuck can be self-centering or of the independent type. The self-centering chuck will have a "scroll" of threads behind the jaws that engages them. The scroll is the screw that will close each of the jaws on the workpiece (simultaneously) with the use of a tool to tighten it. And this chuck will automatically center the workpiece in the chuck. Independent chucks will have jaws that must have a tool used on each of them independently to tighten them. And of course, the workpiece will have to be "fooled around with" until it is centered in the jaws. Workholding is a company that sells chucks and has an article with pictures. A link is provided to the site. Additional links are provided to other images. Be sure to at least look at the "6-jaw chuck taken apart" to see the scroll gear that simultaneously closes the jaws. Look closely. The shiney "circles" are not circles at all but are the gradually shaped spiral of the scroll.
What are the holding devices for lathe?
A chuck is used to hold small cylindrical jobs in a lathe. Various chuck types like 3-, 4- and 6-Jaw self centering chucks or independent 4-Jaw chucks can be used. Some small cylindrical jobs can also be held between two centers on a lathe.
Is the boring process linked to the lathe?
A lathe is capable of boring but the boring process is linked or associated with to a vertical or horizontal boring mill.
Why drilling with vertical drill machine is more efficient than lathe machine?
For simple drilling, the vertical drill press is faster to use.
What does chucked mean?
It usually refers to a type of throwing of an object.
What is the purpose of a woodturning chuck?
A woodturning chuck is the device that holds a piece of wood in a lathe. Wood is worked in a lathe when one wants to produce a 'turned' piece of wood such as a spindle. Different woodturning chucks are used for different sized and shapes of wood to be 'turned'.
What is chucking?
A chuck is a rotating clamp for holding a workpiece to your headstock spindle. If you've got one, you can turn the outside of a bowl to shape (as long as you turn some sort of a foot on the bowl), then flip the bowl around, clamp the foot in the chuck and turn the inside. This lets you get really creative with the foot. There are jaw chucks (which have jaws, just like it sounds) and vacuum chucks, which look like a little cup--you attach a vacuum pump to your lathe, put the workpiece in the cup, draw vacuum and turn away.
Which lathe chuck can hold the most difficult workpiece shapes?
The 4-Jaw independent chuck. Due to its independent jaws it can grip the most complex shapes. 3-Jaw and 4-Jaw self centering chucks are only capable of gripping cylindrical and hexagonal (3-Jaw self-centering) or cylindrical, square and octagonal (4-Jaw self-centering) shapes.
What are internal lathe chuck jaws?
Internal chuck jaws are designed to hold the work internally whereas external jaws hold the work externally. If we use a cylinder as an example the internal chuck jaws would fit into the hole and apply outward presure to grip the work. External jaws would sit on the outside of the cylinder and apply preasure inward to hold the work.
What is lathe chuck?
Two types of jaws are using in lathe chuck for work holding, hard jaws and Soft jaws. Suitable steel of tensile strength not less than 400 MPa with gripping portion hardened and tempered to a hardness between 54 to 62 HRC and the remaining portion to a hardness of 28 HRC Min. Normally ISO/TC 17/SC 4 - Heat treatable and alloy steels are using for Hard Jaws. Soft jaws will be of free cutting non-alloy steels.
What is a 3 jaw chuck on a lathe?
A 3-jaw chuck is the device attached to the spindle of the lathe that clamps and rotates the workpiece for machining. This type of chuck is self-centering which means that the three jaws move in unison at the same diameter when the chuck is opened or closed.
Which one is the correct one in terms of associating them with lathe boring drilling milling and turning?
Although a lathe can bore and drill, it is actually associated with turning. A drilling machine is associated with drilling, a milling machine with milling, and a boring mill with boring.
