0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
To reduce the amount of electrical noise or interference on a scsi cable each end of the scsi chain has a?
terminanting resistor
How many pins on fast wide SCSI cable?
68
How many pins on a wide SCSI cable?
Typically the narrow scan cable has 50 pins.
SCSI bus can support up to how many devices simultaneously?
SCSI, Fast SCSI, Ultra SCSI, Ultra2 SCSI: 8 devices Wide SCSI, Fast Wide SCSI, Ultra Wide SCSI, Wide Ultra2 SCSI, Ultra3 SCSI, Ultra160 and 160+ and Ultra320 : 16 devices Of course, the number of devices supported depends not only on protocol limitations, but cable length, number of cables used, etc.
Internally what type of wire ribbon cable does SCSI use?
50pin
All SCSI devices are connected to the computer via what device?
The Small Computer Systems Interface device; which is usually a SCSI cable. :P
What can happen if you reverse a SCSI cable during installation?
it appears that an SCSI cable can be installed in either direction. If not, then it will 1. not be able to be installed the wrong way 2. not work. you will simply have to switch it; no damage should be done
What is the advantage of SAS over parallel SCSI?
SAS is SCSI, it connects via a serial cable/connector instead of parallel (long and skinny) connector.
What are SCSI types that allow for 16 devices including the adapter to be connected on a single shared cable?
Ultra wide SCSI. wide SCSI buses support 16 devices, rather than the eight devices specified in regular SCSI.
Which interface requires a ribbon cable and a built-in controller on the drive itself?
SCSI
Uses for computer wire awm e101344 style 20276 space shuttle-c?
Its a SCSI cable with a 50pin HD SCSI 2 connector on one side and a 68pin SCSI 3 connector on the other.
What is the maximum length for SCSI-3?
The maximum length of cable that can be used for SCSI-3 is 12 meters. This is applicable to Ultra2 Wide, Ultra 160, and Ultra 320.
